Subscribe to Our Youtube Channel
Related Manuals for UNITED UHC-826
Summary of Contents for UNITED UHC-826
- Page 1 CONVECTOR HEATER USERS INSTRUCTIONS MODEL: UHC-826 TECHNICAL CHARACTERISTICS Convector heater RATED POWER INPUT: 2000W RATED VOLTAGE RANGE: AC230V 50Hz IMPORTANT Read these instructions fully before using the heater. .
- Page 2 ASSEMBLY OF THE HEATER Before using the heater, the feet (supplied separately in the carton), must be fitted to the unit. These are to be attached to the base of the heater using the 4 self-tapping screws provided, taking care to ensure that they are located correctly in the bottom ends of the heater side moldings IMPORTANT Read these instructions fully before using the heater.
- Page 3 After this the heater will keep the air temperature in the room at the set temperature by switching on and off automatically. Fan Operation: -This is operated by means of the switch with the fan symbol along side it. The fan will only operate with the thermostat in the “on”...
- Page 4 WALL- MOUNTING THE HEATER Caution: - there should be a distance of at least 40 cm between the lower part of the appliance and the floor. - the feet must be removed before mounting the appliance on the wall 1. Measure the distance between the two slots situated at the back of the appliance (see picture A) 2.
- Page 5 33, Vas. Olgas avenue - 54641, Thessaloniki, Greece Tel: +30 2310850107, Fax: +30 2310854176 45, Posidonos street - 18344, Moschato, Athens, Greece Tel: +30 210 9402064, Fax: +30 210 9402137 87, 17 November street - 55535, Pylaia, Thessaloniki, Greece Tel: +30 2310944944, Fax: +30 2310944940 www.united-electronics.gr...
Need help?
Do you have a question about the UHC-826 and is the answer not in the manual?
Questions and answers