Table of Contents
Related Manuals for Kilews SKD-BN830LM
Summary of Contents for Kilews SKD-BN830LM
- Page 1 OPERATION AND MAINTENANCE MANUAL SKD-BN830LM SKD-BN850LM SKD-BN830LFM SKD-BN823LFFM SKD-BN730LM SKD-BN722LM SKD-BN722LFM DC-TYPE Non-Carbon-Brush Electric Screwdrivers KILEWS INDUSTRIAL CO., LTD. http://www.kilews.com Y2F119A-10-002...
- Page 2 NOTICE Metal Assembly Screwdrivers are designed for installing threaded fasteners in light industrial and appliance manufacturing applications. KILEWS is not responsible for customer modification of tools for applications on which KILEWS was not consulted. WARNING Important safety information enclosed. Read all these instructions before placing tool in service or operation this tool and save these instructions. It is the responsibility of the employer to place the information in this manual into the hands of the operator.
-
Page 3: Important Safety Rules
Important Safety Rules WARNING! Read all instructions Failure to follow all instructions listed below may result in electric shock fire and/or serious injury. The term “power tool” in all of the warning listed below refer to your mains operated (corded) power tool or battery operated (cordless) power tool. - Page 4 d) Store idle power tools out of reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. Do not let visitors touch the tool or extension cord. All visitors should be kept away from work area. e) Maintain power tools.
-
Page 5: Grounding Instructions
Grounding Instructions 1、 This tool should be grounded while in use to protect the operator from electric shock. NOTICE! To ensure the grounding result, the grounding conductor of the power cord must be well connected with the grounding terminal of power facility. This tool is equipped with grounding conductors. - Page 6 Operations Cautions 1) Whenever changing a bit, make certain the Forward / Reverse Switch is in the “ OFF “ position and tool is unplugged. 2) Do not allow chemicals such as acetone, benzene, thinner, trichloroethylene ketone, or other similar chemicals to come in contact with the screwdriver housing as damage will result.
-
Page 7: Description Of Operation
CAUTION ● Do not drop or abuse the tool. ● Whenever a tool is not being used, position the Power Switch to the “OFF” position and unplug the power cord. Description of Operation Attaching / detaching bit and bit type Push up the holder clamp by finger tip, and it will be unlocked. -
Page 8: Do Not Attempt To Repair This Electric Screwdriver
2. All repairs and maintenance of this tool and its word must be performed by an authorized service center. 3. KILEWS is not responsible for customer modification of tools for applications on which KILEWS was not consulted. -
Page 9: Specifications
2 Pcs. SKD-BN730LM with BIT 2 Pcs SKD-BN722LM/SKD-BN722LFM/SKD-BN823LFFM with BIT 1# & 2# 1 Pcs. Each. 2. Suspension rack and Torque fixing ring acceptable for use with the tool are available from KILEWS catalogue. 3. Torque Fixing Ring (KC-7C) 1 Pcs. -
Page 10: Torque Adjustment Operation
3. The power supplier will generate low power when the button of the power controller is switched to "LO." Also, the electric screwdriver's torque output setting value should be adjusted to middle torsion value accordingly. 4. Please refer to Kilews website http://www.kilews.com for the detail component list.
Need help?
Do you have a question about the SKD-BN830LM and is the answer not in the manual?
Questions and answers