Table of Contents
Advertisement
Chapter 1 Basic Operation
KSD-1100/1210
one channel, the monitoring screen will display the monitoring image of the channel.
(4) ALM area
Click "ALM area", and the alarm area setting box will pop up. Drag the border to flexibly set
the alarm area of the monitoring screen. It can monitor the movement of the alarm area,
monitor the moving picture in the alarm area, and generate an alarm. The alarm information
can be viewed in the alarm information management.
(5) Close SCRN
Click "Close SCRN" to turn on or off the display of the channel image.
(6) Full SCRN
Click "Full SCRN" to display the monitoring image of the channel in full screen. Click "Split
SCRN" to exit the full screen.
*: Micro SD card or TF card
1.9.3 Operation menu
Under the video monitoring screen, swipe the right edge to the left to call up the video
surveillance operation menu. It can be used for monitoring settings, including Video
management, Screenshot management, Alarm Log, Monitoring settings.
1.9.3.1 Video Management
Click the video button to start recording. Click again to end recording. Click the video
management of menu to view the relevant stored videos, which can play, pause, drag
progress, search, and batch operation.
1.9.3.2 Screenshot Management
View the relevant storage pictures of the screenshots and the time of the screenshots. You
can share, search, delete single and batch photos.
1.9.3.3 Alarm Log
Display the alarm time, alarm camera and alarm type. Swipe the data bar to be deleted to the
left to bring up the delete button, click "Delete" button to delete the alarm information. Long
press the alarm information to go to batch operation.
1.9.3.4 Monitoring Setting
[1] Camera Setting
Camera screen: When the camera screen switch is turned off, the camera screen will not be
displayed.
Camera List: Used to display and set the receiving switch of camera screen and the
connection status of all cameras.
[2] Record Setting
1-14
0093107083-01
Advertisement
Table of Contents
