Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Koden KDS-1100
Summary of Contents for Koden KDS-1100
- Page 5 © 2022 Koden Electronics Co., Ltd. All rights reserved. No part of this publication may be reproduced, transmitted, translated in any from by any means without the written permission of Koden Electronics Co., Ltd. The technical descriptions contained in this publication are subject to change without notice. Koden assumes no responsibility for any errors, incidentals or consequential damages caused by misinterpretation of the descriptions contained in this publication.
-
Page 6: Important Notice
• Koden is not liable for any damages caused by earthquake, lightning, wind and flood damage and fire for which Koden is not responsible, and actions by third parties, other accidents, customer’s unintended error/abuse and the use under other abnormal conditions. -
Page 7: For Your Safe Operation
KSD-1100/1210 For Your Safe Operation For Your Safe Operation Pictorial used in this Operation Manual This Operation Manual uses the following pictorials. Understand the meaning of each pictorial and implement the maintenance and inspection. Symbol Meaning Mark for warning This symbol denotes that there is a risk of death or serious injury when not dealing with it correctly. -
Page 8: Caution Item On Handling
For Your Safe Operation KSD-1100/1210 Caution on location of equipment Do not install the equipment where it is excessively damp and suffers from excessive water drops. Escaping from static electricity The static electricity may be generated from the carpet on the floor in the cabin or clothes made of synthetic fiber. - Page 9 Virtually, all data sources might contain some inaccurate or incomplete data. The data is only for your reference and we cannot guarantee any accident, injury or property damage. All legal responsibility and other obligation will not be taken by Koden. 0093107083-01...
-
Page 10: Table Of Contents
Contents KSD-1100/1210 Contents Document Revision History ..................i Important Notice ....................... ii For Your Safe Operation ................... iii Pictorial used in this Operation Manual ............iii Caution Item on Equipment .................iii Caution Item on Handling ................iv Contents........................vi Introduction ......................viii System Configuration ....................ix Configuration of Equipment ..................xi Chapter 1 Basic Operation .................. - Page 11 KSD-1100/1210 Contents 1.8.2 AIS Radar ..................1-9 1.8.3 Ship Parameters ................1-10 1.8.4 Group Management ............... 1-10 1.8.5 Safety Information ................1-10 1.8.6 Message ..................1-10 Video Surveillance ..................1-12 1.9.1 Installation connection diagram ............1-12 1.9.2 Video input screen ................. 1-13 1.9.3 Operation menu ................
-
Page 12: Introduction
Introduction KSD-1100/1210 Introduction The KSD series products provide an intelligent system and multitask running marine equipment networking solution. The main features of this unit are as follows: • The touch screen is flexible and easy to use, with clear picture, superior performance, and strong sense of control. -
Page 13: System Configuration
KSD-1100/1210 System Configuration System Configuration Connection Diagram of KSD-1100 MicroSD card & USB memory: Owner supplied Notice: [1] Default values of NMEA0183 output are RMC, GGA, VTG, GLL, ZDA, XTE and APB. They also can be set by “Settings -Advanced settings-NMEA-Output”. [2] The NMEA0183 input can be analysis normally, if three input ports all input a same kind of sentence, the analytic... - Page 14 System Configuration SD-1100/1210 Connection Diagram of KSD-1210 MicroSD card & USB memory: Owner supplied *: MicroSD card slot or TF card slot Notice: NMEA0183_1: This port can be selected for GNSS sentences output, AIS output or GNSS & AIS output. Baud rate is 38400 bps. NMEA0183_2: This port can be selected for AIS output or other sentences.
-
Page 15: Configuration Of Equipment
KSD-1100/1210 Configuration of Equipment Configuration of Equipment Standard Equipment Configuration List of KSD-1100 Weight/ Name of item Type Remark Quantity Length KSD-1100 2.1kg Display unit Mount Bracket WJ20000011 0.76kg (Standard) Power cable Z108-2A 2-pin Connecting cable With an 8-pin Z108-8A 1.2 m plastic connector and... - Page 16 Configuration of Equipment KSD-1100/1210 HDMI connector cap GJ87000001 NMEA2000 connector GJ87000002 AIS connector cap SJ87V00000 Operation manual KSD-1100/1210. English OM.E *: Multi Function Display 0093107083-01...
- Page 17 KSD-1100/1210 Configuration of Equipment Standard Equipment Configuration List of KSD-1210 Weight/ Name of item Type Remark Quantity Length KSD-1210 7.4kg Display unit WJ20000017 For flush mount 0.2kg Flush Mount Bracket installation Mount Bracket WJ20000016 For desk top 2.6kg (Standard) installation Triangular mounting For fastening WJ23000062...
- Page 18 Configuration of Equipment KSD-1100/1210 WJ14000009 For desk top installation Screw M3 x 8mm WJ07000016 8pcs: For fastening the Triangular mounting plate and the mount bracket 4pcs: For desk top installation and for fastening flush mount bracket Screw M6 x 20mm WJ07000059 For flush mount installation...
-
Page 19: Chapter 1 Basic Operation
KSD-1100/1210 Chapter 1 Basic Operation Chapter 1 Basic Operation Network Connection Click the "Settings" APP on the [HOME] page to enter the system settings page. On the left side of the system settings page, you can connect / set up Wi-Fi, Bluetooth, and Ethernet. Note: Set when connection such as program update is required. -
Page 20: Display Setting
Chapter 1 Basic Operation KSD-1100/1210 c) Swipe left from the right edge of the screen or press the [Menu] button to call up the main menu. d) Click "ENC" → click "Chart Management" to enter the page of Chart Management. e) Click "Chart Update"... - Page 21 KSD-1100/1210 Chapter 1 Basic Operation 3nm / 1.5nm / 1nm / 0.75nm / 0.5nm. [10] 10m depth contour: 10m depth contour display switch, display level can be set, close / 3nm / 1.5nm / 1nm / 0.75nm / 0.5nm. [11] 20m depth contour: 20m depth contour display switch, display level can be set, close / 3nm / 1.5nm / 1nm / 0.75nm /0.5nm.
- Page 22 Chapter 1 Basic Operation KSD-1100/1210 [5] AIS ship information display mode: Specific display modes can be selected, including custom, auto and simplified display, custom display mode, self-definable display AIS information display content, auto display, according to the size of the display window adjusted to streamline the display of ship name, course and speed, simplified display, only display the name and speed of the ship.
-
Page 23: Track Operation
KSD-1100/1210 Chapter 1 Basic Operation [2] Cursor auto hide: The time for automatically hiding the chart cursor can be set, including no hiding, 10 seconds, 30 seconds, and 60 seconds for setting. [3] Cursor line display: After the cursor line is closed, the connection line between the ship and the cursor will not be displayed. -
Page 24: Track Color Switch
Chapter 1 Basic Operation KSD-1100/1210 1.4.1.3 Select a record to continue recording Method 1: On the chart page, click to select the track to continue recording, and click "Track" button in the pop-up operation box to continue the track recording. Method 2: Click the "Track"... -
Page 25: Navigation Data Operation
KSD-1100/1210 Chapter 1 Basic Operation Navigation Data Operation Navigation data includes waypoint and route. 1.5.1 Navigation Data Creation Method 1: Click to confirm the starting point of navigation data on the chart and there will pop-up an operation selection box, click “Add” button on the operation selection box to confirm the adding. -
Page 26: Navigation Operation
Chapter 1 Basic Operation KSD-1100/1210 Navigation operation Navigation data and MOB* can be used to navigation. 1.6.1 Call Navigation Data / MOB to navigation Method 1: Click to select the data that want to navigation on the chart and there will pop-up an operation selection box, click “NAVI”... -
Page 27: Plot Data Deletion
KSD-1100/1210 Chapter 1 Basic Operation 1.7.2 Plot Data Deletion Method 1: Click to select the data that want to delete on the chart and there will pop-up an operation selection box. Click “Delete” button on the operation selection box to delete the data. Method 2: On the [HOME] page, click “Plot Data”... -
Page 28: Ship Parameters
Chapter 1 Basic Operation KSD-1100/1210 1.8.2.3 Display Setting Click “Setting”, users can set the heading line, COG line and track display of AIS targets. 1.8.3 Ship Parameters Method 1: In the AIS list, click the "Ship Parameters" button to open the ship parameters page. Click the "Static Parameter"... - Page 29 KSD-1100/1210 Chapter 1 Basic Operation member to open the message dialog box. [3] Search: Enter keywords in the search box on the message list page, and the message list will display the relevant information of search keywords. In the address book page, enter keywords to display the key members of address book.
-
Page 30: Video Surveillance
The device supports up to 4 network cameras, which can be used for video monitoring, video recording, screen capture, mobile monitoring alarm and other functions. KODEN recommends the following manufacturer and model of the Camera to be used. (Camera: Owner supplied) -
Page 31: Video Input Screen
KSD-1100/1210 Chapter 1 Basic Operation Fig. 2: Video monitoring connection diagram Note: Camera, Router and LAN cable are owner supplied. Note: Use the router with DHCP settings. 1.9.2 Video input screen After access to the camera, click "Video Surveillance" APP on the [HOME] page to enter the video monitoring screen. -
Page 32: Operation Menu
Chapter 1 Basic Operation KSD-1100/1210 one channel, the monitoring screen will display the monitoring image of the channel. (4) ALM area Click "ALM area", and the alarm area setting box will pop up. Drag the border to flexibly set the alarm area of the monitoring screen. It can monitor the movement of the alarm area, monitor the moving picture in the alarm area, and generate an alarm. -
Page 33: Volume/Brightness Adjustment
KSD-1100/1210 Chapter 1 Basic Operation When automatic recording is on, it can be recorded in full time. When it is off, it can set the timing recording time. [3] Alarm Setting There are four alarm types of signal disconnection, occlusion screen, video disconnection and voice alarm, which can be set by the user according to the actual use. - Page 34 - This page intentionally left blank.-...
-
Page 35: Chapter 2 Update Operation
KSD-1100/1210 Chapter 2 Update Operation Chapter 2 Update Operation On the [HOME] page, click “Settings” to go to setting page. Click “Software Update” on the left of setting page to go to view the version information of operation system, chart, calendar, main application, etc. - Page 36 - This page intentionally left blank.-...
-
Page 37: Chapter 3 Installation
KSD-1100/1210 Chapter 3 Installation Chapter 3 Installation Installation of GNSS antenna GNSS antenna should be without continuous obstacles in the level 360º, elevation 5° to 90°. Apart from more than 3m from the s-band radar and INMARSAT system and other high power antenna beam. -
Page 38: Vertical Installation
Chapter 3 Installation KSD-1100/1210 3.2.2 Vertical Installation VHF antenna must be kept more than 2.8m away from ship’s other VHF antenna in vertical position. Equipment Installation 3.3.1 KSD-1100 (10.1”) Installation Desk top Installation Flush mount installation Weight: 2.1 kg Unit: mm (inch) 0093107083-01... -
Page 39: Ksd-1210 (21.5") Installation
KSD-1100/1210 Chapter 3 Installation 3.3.2 KSD-1210 (21.5”) Installation Desk top Installation Weight: 7.4 kg Unit: mm (inch) Flush Mounting: First process the installation hole as required and then put the equipment into it. Install the embedded mounting plate. Lock the M8 knob and M3 screw to the back of the KSD-1210. - Page 40 - This page intentionally left blank.-...
-
Page 41: Chapter 4 To Use Keys
KSD-1100/1210 Chapter 4 To use keys Chapter 4 To use keys KSD-1100 (10.1”) Key Definition 0093107083-01... -
Page 42: Ksd-1210 (21.5") Key Definition
Chapter 4 To use keys KSD-1100/1210 KSD-1210 (21.5”) Key Definition Function Description 1) Short press to adjust screen brightness and device volume while the power is on. (POWER) 2) Long press to power off / reboot the device. 0093107083-01... -
Page 43: Chapter 5 Specifications
KSD-1100/1210 Chapter 5 Specifications Chapter 5 Specifications Model KSD-1100 KSD-1210 Operation System Android 5.1 with OpenGL ES 3.0 & OpenCL 1.1 Cortex-A17 quad core CPU speed 1.8 GHz 32 bit 2 GB DDR3 1333 MHz Flash memory 16 GB Display size 10.1 inch Capacitive multi 21.5 inch Capacitive multi touch... - Page 44 Chapter 5 Specifications KSD-1100/1210 AIS Class B Frequency 156.025 to 162.025 MHz Bandwidth 25 kHz Modulation GMSK / FM Data rate 9600 bps Number of AIS 1 channel transmitter Number of AIS 2 channels: receiver Channel CH87B (161.975MHz), Channel CH88B (162.025MHz) Output power Rx sensitivity...
Need help?
Do you have a question about the KDS-1100 and is the answer not in the manual?
Questions and answers