Table of Contents
Advertisement
Chapter 1 Basic Operation
KSD-1100/1210
c) Swipe left from the right edge of the screen or press the [Menu] button to call up the main
menu.
d) Click "ENC" → click "Chart Management" to enter the page of Chart Management.
e) Click "Chart Update" to pop up the "Local Update" window.
f) Click "Install" to install the SA certificate.
g) After the SA certificate is installed, click "Install" again to install unit license.
h) After the unit license installation is completed, click "Install" again to install the chart.
i) After the installation is completed, click "Update Log" to view the information of update logs.
j) In the Chart Unit page, click "View" to jump to the chart page to view the chart details.
*: Micro SD card or TF card
Note: Unless to be functioned, click [Skip] to proceed.
1.3.2 Display setting
Click "Display Setting" to enter the display settings page, you can choose the mode, such as
mode selection, chart display, own ship display, AIS target display, AIS information window,
my data, window button and advanced settings.
1.3.2.1 Mode selection
Click "Mode Selection" to set the chart display mode, and choose day, night, dusk and other
modes.
1.3.2.2 Chart display
Click "Chart Display" to enter the display setting page of the chart screen.
[1] Chart direction: Set the chart direction to North up, Heading/Course up, and Route up.
[2] Tide Station Display: Provide on / off selection for setting, if set to on, the tide station can
be displayed on the chart.
[3] Water depth mark: Provide on / off selection for setting. If set to on, the water depth line will
be displayed on the chart.
[4] Fishing area: Provide on / off selection for setting, if set to on, the fishing area will be
displayed on the chart.
[5] Latitude-longitude grid display: Provide on / off selection for setting. If set to on, the latitude
and longitude grid lines are displayed on the chart.
[6] Compass overlay: Provide on / off options for setting, if set to on, overlay compass is
displayed on the chart.
[7] Text size of place names: Set the font size of the place names displayed on the chart,
small, medium, and large are available.
[8] Hazard display: Hazard display switch, the display level can be set, close / 3nm / 1.5nm /
1nm / 0.75nm / 0.5nm.
[9] Subsea obstruction: Subsea obstruction display switch, the display level can be set, close /
1-2
0093107083-01
Advertisement
Table of Contents
