Advertisement
CARTS AND WAGONS
2
ATTACH HANDLE AND AXLE
SUPPORT TO GARDEN CART TUB
Complete the following steps to attach the handle
and axle support to the tub:
1. Position the tub so you can access both
the inside and underside. Insert one 2" bolt
through the tub and slide the axle support
over the bolt. Have an assistant hold the bolt
in place if needed.
2. Next, place the tub support assembly—from
previous procedure—over the same bolt and
add the flat washer, lock washer, and nut.
3. Insert another 2" bolt through the tub, axle
support, and support assembly and add the
flat washer, lock washer, and nut. Do not
tighten nuts at this time.
4. Take the handle, slide it over the axle support
ends, and align the mounting holes. Verify
the handle is in the correct position.
5. With assistance, align the mounting holes of
the tub, handle, and support assembly for
one side of the cart.
Parts List and Tools Required
Socket and Ratchet Set
Straight Screwdriver
4
Cart Tub (1)
1/4" x 2"
Bolts (4)
3
5
Cart Handle (1)
Flat Washers (4)
1
2
Axle Brace (1)
Lock Washers (4)
Nuts (4)
Revision date: 09.01.10
4
Advertisement
