Advertisement
CARTS AND WAGONS
READ THIS DOCUMENT BEFORE YOU BEGIN
Thank you for purchasing this premium garden cart. When
properly assembled and maintained, this product will
provide years of reliable service. These instructions
include helpful hints and important information needed to
safely assemble and properly maintain the cart. Please
read these instructions before you begin.
If you have any questions during the assembly, contact
customer service for assistance.
SAFETY PRECAUTIONS
Do not use the cart if any part is broken or damaged.
•
•
This cart is not a toy. Do not allow children to use the
cart.
•
Do not use on inclines; cart may tip or roll away.
Do not load your cart with more than 220 pounds.
•
•
Inflate the tires with ambient air only.
•
Inflate the tires to the proper level as indicated on the
tires.
Never use a flammable gas to inflate the tires.
•
•
Never allow riders in the cart tub.
•
Exercise caution when dumping a loaded cart.
2
CARE AND MAINTENANCE
•
Periodically check nuts and bolts to make sure they
are tight and secure.
•
Clean the cart using water and mild soap. Rinse with
water sprayed from a garden hose. (Tip the tub to let
water drain out after washing.)
•
Inspect the cotter pins in the axle and verify that they
are in position, secure, and in good condition.
•
Check the tire pressure and adjust to recommended
pressure if needed.
REQUIRED TOOLS
The following list identifies the main tools needed for
assembly. Two (2) people are recommended to assemble
the cart.
•
Flathead screwdriver
•
Metric and standard wrenches and socket set
•
Pliers to bend cotter pins
UNPACK AND IDENTIFY PARTS
The following steps will ensure that you have all the
necessary parts before you begin to assembly.
1. Unpack the contents of the shipment and place
where you can easily inventory the parts. Compare
the shipped parts with those shown at the bottom of
each page of these instructions.
2. If anything is missing or you have questions, contact
customer service.
Revision date: 09.01.10
Advertisement
