Advertisement
1
ASSEMBLE TUB SUPPORTS AND
SUPPORT BRACE
The following steps show how to connect the
tub supports and support brace.
1. Position the support bracket against one
tub support, align the mounting holes, and
insert one 1/4" x 3/4" bolt through each
hole.
2. Install one flat washer, one lock washer,
and one nut on each of the 1/4" bolts.
3. With assistance, tighten the fasteners using
a standard screwdriver and ratchet and
socket (or wrench). Bolts should be snug.
Do not twist off.
4. Continue by attaching the supports and
handle to the garden cart tub.
Parts List and Tools Required
Socket and Ratchet Set
Straight Screwdriver
Revision date: 09.01.10
Tub Supports (2)
1/4" x 3/4"
Flat Washers (2) Lock Washers (2)
Bolts (2)
CARTS AND WAGONS
1
2
3
Support Brace (1)
Nuts (2)
3
Advertisement
