Advertisement
The LavryBlack DA10 features:
-
Ultra low jitter modes (without sample rate conversion).
-
Included sample rate conversion for non standard rates.
-
Potentiometer free digitally controlled analog volume control.
-
High power discrete headphone output.
-
XLR, Coaxial (RCA) and Optical (Toslink light pipe) inputs.
-
Stereo/Mono switch (for monitoring of stereo sound field).
-
Polarity Inversion.
-
Optional twin DA10 19 inch rack mount kit. (available soon)
CONNECTIONS:
CAUTION:
Please switch OFF and disconnect power to all devices before connection.
Connect a Digital INPUT from your source using any or all of the following:
-
XLR cable to the AES connector.
-
Toslink light pipe to OPTICAL (after removing the Optical dust cover).
-
Coaxial cable to the SPDIF connector.
Note:
All the connectors can receive either AES/EBU (professional format) or SPDIF (consumer
format).
Connect the XLR OUTPUTS to your destination device (receiver, power amplifier or powered
speaker).
-
THE XLR marked RIGHT to the RIGHT Channel of the destination.
-
THE XLR marked LEFT to the LEFT Channel of the destination.
-
Connect headphones to the HEADPHONE jack.
-
Connect the AC power cord to the rear power entry receptacle.
-
Connect the DA10 and other devices to an AC power source.
MODEL DA10
2
Advertisement
