Disconnecting The Skidding Winch From The Tractor; Storage; Operation - Farmi Forest W35R Operation, Maintenance And Spare Parts Manual

WINCHING
1. The winch is equipped with a clutch, which will be used by the control rope. When the user draws the control
rope, the winch begings to draw in the cable. Winching will stop when the rope is released.
2. The end of the cable drum is equipped with a friction clutch, which slips, if the load is too heavy. This prevents
cable break or damages if the load gets caught.

DISCONNECTING THE SKIDDING WINCH FROM THE TRACTOR

1. Lower down the skidding winch outriggers and lock them with the lock pins.
2. Lower down the skidding winch on hard, even surface.
3. Make sure that the skidding winch cannot fall over.
4. Disconnect the electric power, if the skidding winch is equipped with electro-hydraulic control.
5. Make sure that all the components of the skidding winch and the tractor have stopped moving.
6. Disengage the articulated shaft.
7. Disconnect the push bar from the skidding winch.
8. Disconnect the drawbars from the skidding winch.

STORAGE

1. Store the skidding winch on hard, even and dry surface.
2. Store the skidding winch in an area not frequented by people.
3. Never allow children to play near the skidding winch.
4. Make sure that the skidding winch cannot fall over during storage.

OPERATION

SAFETY PRECAUTIONS
WARNING!
20
Read the operation instructions before operating this machine! It is the owner's
responsibility to instruct all equipment operators and support personnel in the
operation of this winch.
Fig. 4.
Controls
W35R