Farmi Forest W35R Operation, Maintenance And Spare Parts Manual page 27

CLUTCH ADJUSTMENT
Loosen the nuts A and B at both ends of the drum axle. Wrench opening 1 7/16" (36 mm).
Adjust the clutch by turning the axle C with 9/16" or 14 mm wrench. The clutch tightens clockwise, loosens
counterclockwise. Turn max. 1/4 turn.
After adjustment retighten the nuts A and B on the ends of the drum axle.
Pull the control rope. The lever should move up 1.5" (4 cm) before the clutch engages. If the clutch engages earlier
loosen the clutch setting.
ADJUSTING THE ROLLER CHAIN TIGHTNESS
Roller chains tightness adjustment is carried out by moving the chain tightener. See fig. 17.
1. Loosen the two bolts holding the chain tightener (11/16" or 17 mm wrench).
2. Adjust the chain tightness by moving the chain tightener towards or away from center.
W35R
Fig. 15.
P.T.O shaft lubrication
Fig. 16.
Clutch adjustment
27