Table of Contents
Advertisement
CAUTION!
SKIDDING
1. Start the tractor and engage the power take-off. Pull the control rope and winch the logs onto the upper diverting
pulley. The load is locked in place by releasing the clutch and engaging the latch. The latch is engaged when you
loosen the clutch rope and pull the latch rope.
2. Turn off the P.T.O.
3. In case the W30F skidding winch is mounted on the front linkage, lift the three-point hitch until the log ends are
lifted off the ground (fig. 11 and 12).
4. Move the logs to the desired place.
WORKING IN ROUGH TERRAIN
Drop the load before you reach bad terrain. Drive through the bad spot. Winch in the load again (Fig. 13.).
W30F
Keep always minimum three rounds cable at the reel. The cable comes off with
approximately 500 kg string force when the reel runs out of cable.
Fig. 11.
Winching over the upper
diverting pulley
Fig. 12.
Cable on the lower diverting
pulley
23
Advertisement
Table of Contents
