BEFORE FIRST USE
1. Remove all packaging materials.
2. Clean all the parts (see "Care and Cleaning" section).
USE
1. Unwrap the cord and make sure the speed switch is in the "0" position.
2. Insert the beaters or dough hooks. Turn and push them in until you hear the
clipping sound.
Note: Accessories can only be installed when the speed switch is in the
"0" position.
3. Plug in the appliance in the socket.
4. With the ingredients in a bowl of an appropriate size, place the beaters or
the dough hooks into the bowl.
5. Select a speed from the 5-speed switch. The fi rst mark on the hand mixer
body is the slowest speed setting.
• Press the turbo button to operate the motor at maximum speed. When you
are using the mixer in position 5, do not use the turbo button for more than
60 seconds.
6. When the mixture reaches the desired consistency, return the speed switch
to the "0" position and then lift the beaters or dough hooks out of the bowl.
7. To remove the tools, make sure the speed switch is in "0" position and
the hand mixer unplugged from the socket. Press the ejection button. The
ejection button will not work if the speed is not at "0" position.
8. Never use beaters and dough hooks together.
After use, storage the dough hooks and beaters in the storage box.
NOTE:
It is recommended not to operate the appliance for more than 5
minutes without interruption. Allow the appliance to cool down to room
temperature before continue operation.
6
ENGLISH