Table of Contents
Advertisement
2.3
I
S
NSTALLING
1.
Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the
break on the Slot.
2.
Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.
Note:
To remove the DDR modules, push the ejector tabs at both sides of the slot outward at
the same time, and pull the modules out vertically.
K8M890-M7 PCI-E
M
YSTEM
EMORY
8
Advertisement
Table of Contents
