Blaupunkt 5IX60290 Instruction Manual page 60

Stand-alone hob, induction
Table of Contents

Advertisement

Available languages

Available languages

The cooling fan keeps running after it has been switched off:
This is not a fault; the fan continues to run until the appliance has cooled down.
The fan switches off automatically.
The automatic preheating function does not switch on:
The cooking zone is still hot [ H ]
The maximum power level is switched on [ 9 ].
Display [ U ]:
Refer to the chapter on the keep warm level.
Display [ II ]:
Refer to the chapter on the Stop&Go function.
The display shows [
An object or a liquid is covering the buttons. The display will disappear as soon as the buttons
are released or cleaned
The display shows [ E2 ]:
The hob has overheated; let it cool down first and then turn it on again.
The display shows [ E8 ]:
The air intake of the fan is clogged; please remove the things that are causing the
interference.
The display shows [ U400 ]:
The hob is not connected to the mains. Check the connection and turn on the hob.
The display shows [ Er47 ]:
The hob is not connected to the mains. Check the connection and turn on the hob
If any of the above signs persist, please contact customer service.
] or [ Er03 ]:
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

5ix80290

Table of Contents