Safety Precautions Important Safeguards 13. Servicing Do not attempt to service this equipment yourself. Refer all servicing to 1. Read Instructions qualified service personnel. All the safety and operating instructions should be read before the 14. Damage requiring Service appliance is operated. Unplug this equipment from the wall outlet and refer servicing to qualified 2.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage"...
Accessories Upon unpackaging the product, check the contents inside to ensure that all the following accessories are included. Item Network Video Recorder Power Cable Quick Guide Manual and RASplusIP Program CD Optical USB Mouse IR Remote Control Overview Front Panel SATA LED Status LEDs Panic Recording Button...
Page 5
Connections on the Rear Panel Power Network Camera DirectIP™ Gigabit PoE Switch Network eSATA Storage Camera Device Microphone Network Sensor RASplusIP Speaker Remote Keyboard Monitoring Alarm VGA Monitor HDMI Monitor...
Camera Scan Button Network Setup Wizard Use this button to scan and register cameras. After exiting from Quick Wizard, the network with Pressing the Scan button displays the following submenu: Network Wizard will start automatically. ● Rescan: Scan for DirectIP™ cameras that were not scanned automatically.
Login Camera List Area Following options can be accessed by right-clicking on a Configuring the NVR's settings and accessing its searching camera list entry: and other functions require an authorized user login. ● Add/Remove Camera: Adds or removes the selected Bring up the Live menu and either press the Setup camera.
All Channel Playback Basic Feature Press the Menu button while in Live mode. icon and then select Record Select the Search Mode Live Mode Table Search Event Log Search or Thumbnail Search. Once Camera Registration is complete, the system will enter The selected search mode will be initiated.
Select an installation path for the program, and click Selecting the Use DVRNS option on the login window Next. allows you to enter the NVR name registered to the FEN server instead of its IP address. You will be When the install confirmation window appears, click prompted to enter the FEN server’s address and port Next.
Device Registration Click Device Group on the Sites panel and click the bottom. Add Device Group window will appear. To use the functions provided by RASplusIP, you must first register a device and add the device to a device group. Select System >...
Recorded Video Playback – Address, Watch Port, Search Port: Enter the device name used to register the device to FEN. If FEN feature is not enabled on the device, deselect In the Site List, make sure that the device has been DVRNS checkbox and enter the device's IP added to the device group.
Specifications These product specifications may change without prior notice. VIDEO Video Inputs 64 IP channels Video Outputs 1 HDMI, 1 VGA Display Resolution 3840x2160, 1920 x 1200 , 1920 x 1080, 1680 x 1050, 1600 x 1200 Display Speed Up to 1920ips * If more than 16 cameras from video encoders are registered on the NVR, video may not be displayed smoothly in a remote program.
Page 14
INTERFACE Local(NVR) : 1 RCA / 1RCA + 1HDMI Audio In / Out IP Camera : 64 / 64 (Depending on IP Camera) NVR Alarm Spec- In 4 TTL, NC/NO programmable, 2.4V (NC) or 0.3V (NO) threshold, 5V DC NVR Alarm Spec- Out 1 relay output, NC/NO, 2A@125V AC, 1A@30V DC NVR Alarm Spec - Reset IN 1 TTL, terminal block...
Page 15
Proudly distributed by Visit "http://www.hills.com.au/branches" to nd your nearest Hills o ce, or contact us at 1800 685 487 for more information.