Subscribe to Our Youtube Channel
Related Manuals for PACOM PPRO-UR-4EDX
Summary of Contents for PACOM PPRO-UR-4EDX
- Page 1 PPRO-UR-4EDX (S99463) 4 Channel Network Video Recorder PPRO-UR-8EDX (S99464) 8 Channel Network Video Recorder PPRO-UR-16EDX (S99465) 16 Channel Network Video Recorder Ne twork Video Recorder Quick Guide...
-
Page 2: Safety Precautions
Safety Precautions Important Safeguards 13. Servicing Do not attempt to service this equipment yourself. Refer all servicing to 1. Read Instructions qualified service personnel. All the safety and operating instructions should be read before the 14. Damage requiring Service appliance is operated. Unplug this equipment from the wall outlet and refer servicing to qualified 2. -
Page 3: Fcc Compliance Statement
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage"... -
Page 4: Front Panel
Accessories Upon unpackaging the product, check the contents inside to ensure that all the following accessories are included. Item Power Cable / DC Adapter Network Video Recorder Quick Guide (12V, 48V) Manual and RASplusIP Program CD Optical USB Mouse IR Remote Control Assembly Screws for Adding Hard Disk Drives SATA2 Cables Overview... -
Page 5: Rear Panel
Rear Panel PPRO-UR-4EDX Factory Reset Button Audio Ports VGA Out Port HDMI Out Port eSATA Port Power In Port (48V) Video In / PoE Ports Network Port Alarm Connection Ports RS-232 Port Power In Port (12V) PPRO-UR-8EDX / 16EDX Factory Reset Button... -
Page 6: Remote Control
Connections on the Rear Panel eSATA Storage Device Speaker VGA Monitor Camera DirectIP™ Gigabit PoE Switch HDMI Monitor Camera Alarm Network Sensor RASplusIP Power (48V) Remote Power (12V) Monitoring Keyboard Remote Control ID Button Panic Button Camera Buttons Status Button Layout Button PTZ Control Buttons Register Mode Button... -
Page 7: Getting Started
Network Setup Wizard Getting Started After exiting from Quick Wizard, the network with Network Wizard will start automatically. Setup Wizard ● Start the Network Setup Wizard • Setup Wizard only appears during initial booting. ● Internet When you login as an administrator account after Connection initial booting, you can use Wizard to go to Live menu and select Wizard. -
Page 8: Camera Registration
Camera Registration Select Scan to commence scanning. Select a camera from the scan list and then select Add Once Network Setup Wizard is complete, live mode screen Camera. The Device Login window will appear. appears. While in live mode, right-click on the mouse and Enter a User ID and a Password for the selected select Camera Registration to run the Camera Registration camera. -
Page 9: Apply/Cancel Buttons
Apply/Cancel Buttons Find Password While in Camera Registration mode, select Apply to register If you do not know the password, select FIND PW . You can set a all changes. new password. Select Cancel to exit Camera Registration mode without applying the changes. -
Page 10: Basic Feature
All Channel Playback Basic Feature Press the Menu button while in Live mode. icon and then select Record Select the Search Mode Live Mode Table Search Event Log Search or Thumbnail Search. Once Camera Registration is complete, the system will enter The selected search mode will be initiated. -
Page 11: System Requirements
Selecting the Use DVRNS option on the login window Next. allows you to enter the NVR name registered to When the install confirmation window appears, click the FEN server instead of its IP address. You will be Next. prompted to enter the FEN server’s address and port NET Framework and Visual C++ Runtime number under Setup. -
Page 12: Device Registration
Device Registration Click Device Group on the Sites panel and click the bottom. Add Device Group window will appear. To use the functions provided by RASplusIP, you must first register a device and add the device to a device group. Select System >... -
Page 13: Recorded Video Playback
Recorded Video Playback – Address, Watch Port, Search Port: Enter the device name used to register the device to FEN. If FEN feature is not enabled on the device, deselect In the Site List, make sure that the device has been DVRNS checkbox and enter the device's IP added to the device group. -
Page 14: Specifications
Specifications These product specifications may change without prior notice. VIDEO Video Inputs 4/8/16 IP channels Video Outputs 1 HDMI, 1 VGA Display Resolution 3840 x 2160, 1920 x 1200 , 1920 x 1080, 1680 x 1050, 1600 x 1200 Up to 480ips (16EDX) Display Speed Up to 240ips (8EDX) Up to 120ips (4EDX) -
Page 15: Power Consumption
INTERFACE Local(NVR) : - / 1RCA + 1HDMI IP Camera : 16 / 16 (Depending on IP Camera) (16EDX) Local(NVR) : - / 1RCA + 1HDMI Audio In / Out IP Camera : 8 / 8 (Depending on IP Camera) (8EDX) Local(NVR) : - / 1RCA + 1HDMI IP Camera : 4 / 4 (Depending on IP Camera) (4EDX) NVR Alarm Spec- In... - Page 16 Proudly distributed by Visit "http://www.hills.com.au/branches" to nd your nearest Hills o ce, or contact us at 1800 685 487 for more information.
Need help?
Do you have a question about the PPRO-UR-4EDX and is the answer not in the manual?
Questions and answers