Table of Contents
Advertisement
Available languages
Available languages
26
LED Lights: Your appliance has been equipped with a LED (light) strip which is programmed with three
colour modes. Plug the LED power supply into a GFI protected electrical outlet.
EN
Turn on the light switch located under the access panel and toggle the switch off and on to cycle through
to desired Mode.
Mode 1 - Simulated White.
Mode 2 - Continuous 2 colour shift. Takes 8-10 seconds to smoothly ramp up one colour to 100%, as the
other fades off from 100% to 0. Continually shifts in colour (17 seconds per colour, up and back down.)
Mode 3 - Freeze Mode Colour stops the colour shift on whichever colour it was on in Mode 2 at the time it
was turned off, does not continue to shift.
NOTE!
AC Connector
AC
Each time the appliance is used: Perform a visual check of the burner flame pattern. An abnormal flame
pattern may be caused by blocked burner ports, inconsistent distribution of glass embers, or refractory
rocks which are placed directly over burner ports.
www.napoleongrills.com
Switch off for 10 seconds to reset to beginning colour mode.
Transformer
Threaded
120 vAC
12 vAC
Power
Connector
NORMAL
ABNORMAL
FLAG
CONNECTORS
MD6
Connector
MD6
Digital Control Unit for
Connector
LED Colour switching
Strip Light
Strip Light
N415-0346 MAY 15.18
Advertisement
Table of Contents
