Table of Contents
Advertisement
Available languages
Available languages
4. Line up the brackets on the trim with the slots on the side of the base and insert as illustrated pushing
until trim sits flush against front surface. The brackets have been designed with multiple slots (1/4" (6mm)
increments to accommodate different finishing materials.
NOTE!
materials in excess of
2.5" (63.5mm) a gap
will be visible between
the brick ledge and the
trim.
5. Loosen the thumb screw and lower until it stops. Retighten thumb screw, and close the access door.
Tighten in position.
N415-0346 MAY 15.18
If using facing
15
EN
Serrated Side Up
www.napoleongrills.com
Advertisement
Table of Contents
