Page 2
Programming the 596KP keypad Basic set up configuration The manual for the 596KP is quite in-depth so please refer to the basic set-up as written below but also please read the manual carefully Both door panel and video monitor have DIP switches to the rear of them which are used for different configurations, mainly they are used if you have multi door panel installations.
11.Cables Requirements The maximum distance of the wiring is limited in the DT system. Using different cables may also affect the maximum distance which the system can reach. The farest monitor monitor with two or four monitors monitor monitor DBC4S When Monitor quantity <...
Need help?
Do you have a question about the 596KP and is the answer not in the manual?
Questions and answers