Kenwood KMM-BT304 Instruction Manual page 20

BLUETOOTH®
(for
Make a call using voice recognition
1
Press and hold to activate the voice recognition of the
connected phone.
2
Speak the name of the contact you want to call or the voice
command to control the phone functions.
• Supported Voice Recognition features vary for each phone. Refer to the
instruction manual of the connected phone for details.
• This unit also supports the intelligent personal assistant function of
iPhone.
Settings in memory
Store a contact in memory
You can store up to 6 contacts into the number buttons ( 1 to 6 ).
1
Press to enter Bluetooth mode.
2
Turn the volume knob to select
[NUM BER DIAL]
, then press the knob.
3
Turn the volume knob to select a contact or enter a phone number.
If a contact is selected, press the volume knob to show the phone
number.
4
Press and hold one of the number buttons ( 1 to 6 ).
"STORED" appears when the contact is stored.
To erase a contact from the preset memory, select
and store a blank number.
Make a call from memory
1
Press to enter Bluetooth mode.
2
Press one of the number buttons ( 1 to 6 ).
3
Press the volume knob to call.
"NO MEMORY" appears if there is no contacts stored.
16
ENGLISH
/ )
[CALL HISTORY] [PHONE BOOK]
, , or
[NUM BER DIAL]
in step
Other settings
1
Press the volume knob to enter
2
Turn the volume knob to select an item (see the following table),
then press the knob.
3 2
Repeat step until the desired item is selected/activated or follow
the instructions stated on the selected item.
4
Press and hold
To return to the previous setting item, press
BT M ODE
PHONE SELECT Select s t he phone or audio device t o connect or disconnect .
" * " appears in front of t he device nam e w hen connect ed.
" " appears in front of t he current playback audio device.
AUDIO SELECT
You can only connect a m axim um of t w o Bluet oot h phones and one
•
Bluet oot h audio device at any t im e.
DEVICE DELETE Turn t he volum e knob t o select a device t o delet e, t hen press t he knob.
1
Turn t he volum e knob t o select [YES] or [NO] , t hen press t he knob.
2
PIN CODE EDIT
Changes t he PIN code (up t o 6 digit s).
(0000)
1 Turn t he volum e knob t o select a num ber.
S
2 Press
2
Repeat steps
Press the volum e knob to confirm .
3
RECONNECT ON : The unit autom atically reconnect w hen the last connected Bluetooth
device is w ithin range. ; OFF : Cancels.
AUTO PAIRING ON : The unit autom atically pair supported Bluetooth device (iPhone/
iPod touch/ Android device) w hen it is connected through USB input
term inal. Depending on the operating system of the connected device,
this function m ay not w ork. ; OFF : Cancels.
INITIALIZE YES : Initializes all the Bluetooth settings (including stored pairing,
phonebook, and etc.). ; NO : Cancels.
[FUNCTION]
.
to exit.
.
/ T to m ove the entry position.
1 and 2 until you finish entering the PIN code.
XX
Default: