Table of Contents
Advertisement
BLUETOOTH®
(for
BLUETOOTH — Connection
Supported Bluetooth profiles
– Hands-Free Profile (HFP)
– Advanced Audio Distribution Profile (A2DP)
– Audio/ Video Remote Control Profile (AVRCP)
– Serial Port Profile (SPP)
– Phonebook Access Profile (PBAP)
Supported Bluetooth codecs
– Sub Band Codec (SBC)
– Advanced Audio Coding (AAC)
Connect the microphone
Rear panel
Microphone
input jack
Adjust t he
m icrophone angle
Secure using cord clam ps (not
supplied) if necessary.
For t he locat ion of t he m icrophone input jack, refer t o page 29.
*
12
ENGLISH
/
)
1
2
3
Once pairing is completed, Bluetooth connection is established automatically.
•
•
• This unit supports Secure Simple Pairing (SSP).
• Up to five devices can be registered (paired) in total.
Microphone
• Once the pairing is completed, the Bluetooth device will remain registered in the unit
(supplied)
• A maximum of two Bluetooth phones and one Bluetooth audio device can be connected
• Some Bluetooth devices may not automatically connect to the unit after pairing. Connect
• Refer to the instruction manual of the Bluetooth device for more information.
Pair and connect a Bluetooth device for the first time
Press
to turn on the unit.
Search and select this unit model name (KMM-BT3 * * /KMM-BT2 * * ) on the Bluetooth
device.
"PAIRING" "PASS XXXXXX" Device name "PRESS" "VOLUME KNOB" appears on
the display.
• For some Bluetooth devices, you may need to enter the Personal Identification
Number (PIN) code immediately after searching.
Press the volume knob to start pairing.
"PAIRING OK" appears when pairing is completed.
: "BT1" and/ or "BT2" indicator on the faceplate lights up.
: "BT1" and/ or "BT2" on the display window lights up.
even if you reset the unit. To delete the paired device,
at any time.
However, while in BT AUDIO source, you can connect to five Bluetooth audio devices and
switch between these five devices.
the device to the unit manually.
16, [DEVICE DELETE]
(
17)
.
Hide quick links:
Advertisement
Table of Contents
