Table of Contents
Advertisement
by unskilled people can lead to damage or malfunction. Please contact
the nearest authorized technical assistance center. Always use the
same type of spare parts.
DO NOT touch any wire during operation as high voltage might be
causing
electric shock.
Warning:
To prevent or reduce the risk of electrical shock or fire, do not
expose the unit to rain or moisture.
DO NOT open the unit within five minutes after switching off.
The housing, the lenses, or the ultraviolet filter must be replaced
if they are visibly damaged.
Caution:
There are no user serviceable parts inside the unit. DO NOT open the
housing or attempt any repairs yourself. In the unlikely event your unit
may require service, please contact your nearest dealer.
Installation:
The unit should be mounted via its screw holes on the bracket. Always
ensure that the unit is firmly fixed to avoid vibration and slipping while
operating.
And make sure that the structure to which you are attaching the unit is
secure and can support a weight of 10 times of the unit's weight. Also
always use a safety cable that can hold 12 times of the weight of the
unit when installing the fixture.
The equipment must be fixed by professionals. And it must be fixed at
a place where is out of the touch of people.
2. TECHNICAL SPECIFICATIONS
Light Sources:
Zoom wash face: 6*60W 4IN1 RGBW LED;
Strobe face: 20*10W white led+384*0.5W 3in1 RGB Led
Beam Angle:4.5°- 55°
http://prolux.net.ua
19
Advertisement
Table of Contents
