Safety Instructions - Prolux MOVING WASH STROBE User Manual

http://prolux.net.ua
STATEMENT
The product has well capability and intact packing when leave factory.
All of the users should comply with warning item and manual, any
misuse cause of the damages are not included in our guarantee, and
also cannot be responsible for any malfunction & problem owing to
ignore the manual.

1. SAFETY INSTRUCTIONS

Please keep this User Guide for future consultation. If you sell the unit
to another user, be sure that they also receive this instruction booklet.
Unpack and check carefully there is no transportation damage before
using the unit.
Before operating, ensure that the voltage and frequency of power
supply match the power requirements of the unit.
It's important to ground the yellow/green conductor to earth in order to
avoid electric shock.
The unit is for indoor use only. Use only in a dry location.
The unit must be installed in a location with adequate ventilation, at
least 50cm from adjacent surfaces. Be sure that no ventilation slots are
blocked.
Disconnect main power before replacement or servicing.
Make sure there are no flammable materials close to the unit while
operating as it is fire hazard.
Use safety cable when fixes this unit. DO NOT handle the unit by
taking its head only, but always by taking its base.
Maximum ambient temperature is Ta: 40℃. DO NOT operate it were
the temperature is higher than this Unit surface temperature may reach
up to 85℃.
DO NOT touch the housing bare hand during its operation. Turn off the
power and allow about 15 minutes for the unit to cool down before
replacing or serving.
The event of serious operating problem, stop using the unit
immediately. Never try to repair the unit by yourself. Repairs carried out
18