Advertisement
Advertisement
Table of Contents
Related Manuals for Duevi SINT-13
Summary of Contents for Duevi SINT-13
- Page 1 SINT-13 W I R E L E S S V O I C E S Y N T H E S I S R E C E I V E R W I T H A C T I V A T I O N...
-
Page 2: Table Of Contents
Thank you for choosing our product. We invite you to read carefully these directions before installing and using this device in order to fully make the most of all its capacities. SOMMARIO DESCRIPTION ..................................... 3 TECHNICAL ....................................4 RESET ......................................5 RADIO CODES LEARNING .............................. -
Page 3: Description
DESCRIPTION SINT-13 is a voice synthesis that replay to 13 different radio codes with the same number of voice messages recorded by the user. Two voice messages are for arming and disarming codes from remote controls (TXS, TXS/M or DVTR- RT keyboard) (max 4 remote controls/users). -
Page 4: Technical
[JP1 closed on B and C] Off: normal working, SINT-13 in stand-by Solid on: LD2 (YELLOW LED) If JP1 closed (on A and B or on B and C): SINT-13 in programming mode If JP1 opened: normal working, SINT-13 active ... -
Page 5: Reset
As soon as the pins are shorted: LD4 (RED) lights solid on LD2 blinks one time then stay solid on: this means SINT-13 is ready to learn the radio code in position 1 (REMOTE CONTROLS). Now it is possible to learn the radio code: ... - Page 6 Remote controls It is possible to store up to four radio activators or keyboard users on memory position 1. These radio codes are memorized in four different internal sub-spaces (circular queue). Learning remote controls/users > during the learning stay in memory position 1 to store all the remote controls/users: the first, the second, and so on.
-
Page 7: Voice Messages Recording
As soon as the pins are closed: LD1 (GREEN) lights solid on LD2 blinks one time then stay solid on: SINT-13 is ready to record the Voice Message 1. Now it is possible to record the voice message: ... -
Page 8: Working
WORKING WARNING SINT-13 must be activated via remote control/user (command or arming button) in order to play voice messages from sensors and control panel/TSR. SINT-13 can be “disabled” via remote control/user (command or disarming button) in order to stop the play of voice messages.
Need help?
Do you have a question about the SINT-13 and is the answer not in the manual?
Questions and answers