Adjusting Chronograph Hands To Zero Position - Invicta 360 Instruction Manual And Warranty

CHRONO GRAPHS
Adjusting the Chronograph Hands to Zero Position
1. Pull out the crown to position 2. All three chronograph hands are in
their correct or incorrect zero position.
2. Keep push-button A and B depressed simultaneously for at least 2
seconds. The center stop-second rotates 360º and corrective mode is
activated.
Adjusting the center stop second
Single step: Press push-button A 1 x short
Continuous: Press push-button A 1 x long
26
Adjusting the Chronograph Hands to Zero Position
To adjust the next hand: Press push-button B.
Adjusting the 1/10 sec counter hand (position 6h)
Single step: Press push-button A 1 x short
Continuous: Press push-button A 1 x long
To adjust the next hand: Press push-button B.
Adjusting the minute counter hand (position 9h)
Single step: Press push-button A 1 x short
Continuous: Press push-button A 1 x long
3. Push the crown back into position 0. Termination of the chronograph
adjustment can be carried out at any time.
CHRONO GRAPHS
27