Racelogic VBOX Touch Motorsport V1 Quick Start Manual page 6

Connectors
Antenna
If you are struggling to maintain a stable satellite lock,
you can connect the supplied external antenna
(RLACS262) to the antenna socket. You should also use
the external antenna when you are doing Brake Trigger
Tests. You can find more information about the external
Left Side
antenna further down on the page.
D IN/PPS
The Digital In and PPS port can be used for connection
to the VBOX Brake Pedal Trigger to provide brake
trigger deceleration tests. More information on this is
available here.
The port can also be used to connect a Hand Held Start/
Stop Logging Switch (RLVBACS010) to control the
logging of the unit. More information on this is available
here.
CAN/Serial
The top CAN/Serial port can be used to output serial
Right Side
information, allowing you to either connect VBOX Touch
to VBOX Test Suite via an RLCAB001 and conduct live
testing, or output lap timing parameters. You can find
more information about the Serial Output settings here.
You can find more detailed connector information on the
PIN OUTS page.
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/VBOX_Touch_V1/
Quick_Start_Guides_%E2%80%93_VBOX_Touch_V1/VBOX_Touch_Lap_Timing_Mode_-_Quick_Start_Guide
6