Racelogic VBOX Touch Motorsport V1 Quick Start Manual page 15

Basic Screen:
• VBOX Touch will display the current live lap time and when a new lap starts, the previous lap time will be displayed
for 3 seconds before reverting to displaying the current live lap time. It is possible to just display the previous lap
time by Disabling the Rolling Lap Time.
10. It is possible to override the detected start/finish line by manually setting a Start/Finish Line or just a Finish Line.
11. VBOX Touch can also start lap timing from a Standing Start if a separate a Finish Line has been set, this is
particularly suitable for sprint style events.
12. By default, VBOX Touch will automatically start recording when travelling over 0.5 km/h, this can be changed
within the General Settings.
13. Tapping on the SD Card Icon when green will manually start or stop logging data, overriding the Configured
Logging Strategy.
14. The Record Icon will show when the unit is logging data to the SD card.
If you have come to a stop, but the Record Icon is still on, press the SD Card Icon to stop the logging before
removing the card.
Sometimes, due to poor satellite visibility in a garage or close to a building, the box may start recording, even if the
car is stationary. Always check the Record Icon before ejecting the card.
IMPORTANT – The SD card shouldn't be removed when the Record Icon is on as you may lose data.
Note: If for some reason the SD card is removed whilst still recording, it may need to be repaired using a PC
before it can be reused.
15. A screenshot of what is displayed on the screen can be taken at any time by pressing the Screenshot Button.
16. To reset lap timing data, lap time history and the reference lap, press the Reset Button.
17. When you have finished, a history of the lap results can be viewed by pressing the Results Button.
More information on the Lap Timing Mode can be found
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/VBOX_Touch_V1/
Quick_Start_Guides_%E2%80%93_VBOX_Touch_V1/VBOX_Touch_Lap_Timing_Mode_-_Quick_Start_Guide
here.
15