End Time - Beko B3WT58410M2 User Manual

To deactivate the child lock:
Press and hold the related auxiliary function
button for 3 seconds. After the countdown
as "3-2-1" on the display is over, Child Lock
symbol disappears.
• Bluetooth
You can use the bluetooth connection func-
tion to pair your machine with your smart
device. This way, you can use your smart
device to get information about your ma-
chine and control it.
To activate bluetooth connection:
Press and hold Remote Control function but-
ton for 3 seconds. Countdown "3-2-1" will
be displayed, and then Bluetooth icon will
appear on the display. Release Remote Con-
trol function button. The bluetooth icon will
flash while the product is pairing with smart
device. If connection is successful, icon will
remain on.
To deactivate bluetooth connection:
Press and hold Remote Control function but-
ton for 3 seconds. Countdown "3-2-1" will
be displayed, and then Bluetooth icon will
disappears on the display.
First setup of the HomeWhiz applic-
ation must be complete for the
bluetooth connection to be activ-
ated. After setup, pressing the re-
mote control function button while
the knob is at Download Pro-
gramme/Remote Control position
will automatically activate the
bluetooth connection.

6.9 End Time

Time display
When the end time function is selected, the
remaining time until the programme starts is
shown in hours such as 1h, 2h, and the re-
maining time to complete the programme
after your programme starts is shown in
hours and minutes as in the 01:30 example.
Programme duration may differ from
the values in section "Programme
and consumption table" depending
on the water pressure, water hard-
ness and temperature, ambient tem-
perature, amount and the type of
laundry, auxiliary functions selected
and the changes at the mains
voltage.
After a certain period when the end
time function is activated, the ma-
chine switches to stand-by mode
and some LEDs on the display are
turned off. LEDs are illuminated in
case of any user entry.
With the End Time function, the end time of
the programme may be set up to 24 hours.
After pressing End Time button, the pro-
gramme's estimated ending time is dis-
played. If the End Time is set, End Time in-
dicator is illuminated.
In order for the End Time function is activ-
ated and the programme is completed at the
end of the specified time, you must press
Start/Pause button after adjusting the time.
If you want to cancel End Time function,
press On/Off button to turn off and on the
machine.
EN / 30