How To Grab A Picture From A Film (Concise Procedure); Coordinated Use Of Image Bank And Clinical Forms - ASCOM DIGISTAT User Manual

 Click the Set Stop Position button (Fig 58 C).
The portion corresponding to the selected video is highlighted on the "time bar" on the left (Fig 61
A).
 Click the Save button on the command bar (Fig 61 C).
The selected video portion is this way saved as a new independent video. A new thumbnail,
corresponding to the new video, is displayed on the "Examination detail" screen (Fig 51).

1.13.3. How to grab a picture from a film (concise procedure)

To grab a frame from a film and save it as an image of a certain examination,
 access the "Examination detail" screen containing the film from which the frame must be
extracted (Fig 51).
 Click, on the left of the screen, the icon corresponding to the relevant film. The film starts.
 Click the Trim button on the command bar (Fig 51 A). The "Trim" screen opens (Fig 52).
 Use either the cursor or the buttons described in paragraph 1.13 (Fig 54) to display the
wanted frame.
 Click the Grab button on the command bar.
Otehrwise
 click the
saved as image.

1.14. Coordinated use of Image Bank and Clinical Forms

To display the examination information that is not immediately available on DIGISTAT
Bank select the DIGISTAT
 click the corresponding icon on the lateral bar (Fig 64).
The examination record is this way displayed (Fig 65 shows an example).
DIG UD IMB IU 0005 ENG V01
button on the "Trim" screen. The frame currently displayed is this way
®
Clinical Forms module. To do that
Fig 64
®
Image
Page 46 of 49