Download Print this page
BENDIX Wingman Fusion FLR-21 Service Data

BENDIX Wingman Fusion FLR-21 Service Data

Radar sensor

Advertisement

Quick Links

Bendix
Wingman
®
Vehicle Equipped with the
Bendix
Wingman
®
Driver Assistance System
Figure 1 – Bendix
Wingman
®
IMPORTANT
Bendix
-brand Electronic Control Units (ECUs)
®
are not designed to store data for purposes of
accident reconstruction, and Bendix
Diagnostic Software is not intended to retrieve data
for purposes of accident reconstruction. Bendix
makes no representations as to the accuracy of
data or video retrieved and interpreted from ECUs
for purposes of accident reconstruction. Bendix
does not offer accident reconstruction services or
interpretation of stored data. Bendix ECUs are not
protected from fire, loss of power, impact damage,
or other conditions that may be sustained in a crash
situation and may cause data to be unavailable or
irretrievable.
Integrating a camera, radar, and brakes, the Bendix
Wingman
Fusion
Driver Assistance System (Fusion)
®
provides the following alerts and actions:
• Stationary Vehicle Braking (SVB)
• Enhanced Collision Mitigation Braking (CMB)
• Active Cruise with Braking (ACB)
• Overspeed Alert and Action (OAA)
• Lane Departure Warnings (LDW)
• Stationary Object Alerts (SOA)
• Alert Prioritization
NOTE: Depending on configuration, the system may record
data and video of certain events and, when integrated
with a telematics provider, can transmit this information
for viewing on the SafetyDirect
Fusion
FLR-21
®
Fusion
®
Windshield-mounted
Camera
Fusion
System
®
ACom
PRO
®
®
by Bendix CVS web
®
Radar Sensor
Front Bumper-mounted
portal. Currently, the system does not integrate alerts
from Bendix
Monitoring System (TPMS) by Bendix CVS.
Bendix
FLR-21
Radar Sensor
SafetyDirect
®
By Bendix CVS
Processor
®
For more information: • Bendix AutoVue FLC-20 Camera - see
• Bendix
ESP
®
®
• SafetyDirect
®
Figure 2 – Major Bendix Wingman Fusion System Components
The major components that are used in the Wingman
Fusion system are the Bendix
the Bendix
FLR-21
FLC-20
Camera (powered by the Mobileye
System-on-Chip EyeQ processor with state-of-the-art
vision algorithms), the Bendix
or OEM dash display, the SafetyDirect processor, and the
vehicle's telematics system. See Figure 2.
FLR-21 Radar
NOT TO SCALE
BlindSpotter
or SmarTire
®
Bendix
ESP
®
®
EC-80
Controller
EC-80
Controller - see
SD-13-4986
By Bendix CVS Processor - see SD-65-21025
ESP
®
®
Radar Sensor, the Bendix
Driver Interface Unit (DIU
Tire Pressure
®
Bendix
Driver
Interface Unit
(DIU
)
Bendix
AutoVue
®
FLC-20
Camera
SD-64-20124
EC-80
Controller,
AutoVue
®
®
)
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Wingman Fusion FLR-21 and is the answer not in the manual?

Questions and answers

Summary of Contents for BENDIX Wingman Fusion FLR-21

  • Page 1 ™ By Bendix CVS EC-80 Controller ™ Camera Processor Integrating a camera, radar, and brakes, the Bendix ® For more information: • Bendix AutoVue FLC-20 Camera - see SD-64-20124 Wingman Fusion Driver Assistance System (Fusion) ® ™ • Bendix EC-80...
  • Page 2 Driver ® ® ™ Bendix safety technologies complement safe driving Assistance System can result in a collision causing practices. No commercial vehicle safety technology property damage, serious injuries, or death. Be sure to replaces a skilled, alert driver exercising safe driving...
  • Page 3 How to Generate a Bendix Wingman Fusion System Diagnostic Trouble Code (DTC) Report . . . 13 Table of Bendix Wingman Fusion DTCs ....... 15 Clearing DTCs .
  • Page 4 ® ™ Radar Beam Windshield-mounted Front Bumper- Camera mounted Radar Detected Forward Vehicle Vehicle Equipped with the Bendix ® Wingman Fusion System ® ™ The DARK GRAY area approximates the The STRIPED area approximates the zone where the Wingman Fusion system zone where the Active Cruise with is ready to alert –...
  • Page 5 Many Fusion-equipped vehicles use the SafetyDirect collision mitigation technology is designed to be ready to ® by Bendix CVS processor and the vehicle’s telematics alert the driver to detectable objects in front of the vehicle processor to record vehicle and driver safety data after (whether or not cruise control is set) and react to the safety system events.
  • Page 6 (Note that other vehicle system self-tests, e.g. the ABS “chuff” test, may run during the initial 15 seconds after ignition “on.”) As the Bendix Wingman Fusion system self-test runs, the driver should hear a short set of beeps. The test checks the engine, transmission, and brake systems to make sure they are communicating.
  • Page 7 With cruise control engaged, and while following a vehicle ahead in gentle curves (assuming a 3 to 3.5 second following distance): Does the Bendix Wingman Fusion system continue to follow the vehicle through the curves at a constant distance? _____________...
  • Page 8 ABS and Bendix Wingman Fusion system is installed on ® ___________________________ the vehicle? See Section 2.3: Reading the System Software Version. ___________________________ ___________________________ What are the key system indicators? See Section 3.1: Reading Bendix Wingman Fusion System Key Indicators. ___________________________ ___________________________ ___________________________...
  • Page 9 If Bendix Tech Team assistance is needed, prior to calling us at 1-800-AIR-BRAKE (1-800-247-2725), option 2, complete the Troubleshooting Checklist to help reduce the time needed to troubleshoot the system.
  • Page 10 This is rare, but most likely to occur when driving in deserts or barren or vehicles)? areas. If the system does set a DTC, the Bendix Wingman Fusion system provides a visible warning to the driver. In addition, the vehicle will also drop out of cruise mode, providing an audible and/or visual warning to the driver as well.
  • Page 11 Overview of Possible Issues (1.3) Issue Description Vehicle Diagnostic The Bendix Wingman Fusion system will not operate and will set a DTC if any of the Trouble Codes following vehicle systems also show a DTC: engine, engine cruise, instrument cluster, (DTCs)
  • Page 12 Electronic Control Unit (ECU) diagnostic information and configuration capability. For controller- specific system diagnostics, use a current version of the ACom PRO Diagnostic Software. Figure 5 - Starting Bendix ACom PRO Diagnostic Software Figure 4 – Bendix ACom PRO Diagnostic Software...
  • Page 13 DTCs by selecting “Clear Faults.” 4. To read and clear DTCs from a specific Bendix Electronic Control Unit (ECU), select the Bendix ECU on the roll call select “Clear Faults.”...
  • Page 14 Diagnostic Software, visit the Bendix ® ® ™ website at bendix.com. You will also find a current list of compatible RP1210 data link adapters for ABS and the Bendix Wingman ACB system. ® ® For direct telephone technical support, contact the Bendix Tech Team at 1-800-AIR-BRAKE (1-800-247-2725), option 2.
  • Page 15 15 seconds. Do not attempt to diagnose J1939 DTCs without the engine running. Call the Bendix Tech Team at 1-800-AIR-BRAKE (1-800-247-2725), option 2, for troubleshooting assistance. Table 4A – DTC Code to Service Action Code (Pages 15 – 21)
  • Page 16 15 seconds. Do not attempt to diagnose J1939 DTCs without the engine running. Call the Bendix Tech Team at 1-800-AIR-BRAKE (1-800-247-2725), option 2, for troubleshooting assistance. Table 4A – DTC Code to Service Action Code (Pages 15 – 21)
  • Page 17 15 seconds. Do not attempt to diagnose J1939 DTCs without the engine running. Call the Bendix Tech Team at 1-800-AIR-BRAKE (1-800-247-2725), option 2, for troubleshooting assistance. Table 4A – DTC Code to Service Action Code (Pages 15 – 21)
  • Page 18 15 seconds. Do not attempt to diagnose J1939 DTCs without the engine running. Call the Bendix Tech Team at 1-800-AIR-BRAKE (1-800-247-2725), option 2, for troubleshooting assistance. Table 4A – DTC Code to Service Action Code (Pages 15 – 21)
  • Page 19 15 seconds. Do not attempt to diagnose J1939 DTCs without the engine running. Call the Bendix Tech Team at 1-800-AIR-BRAKE (1-800-247-2725), option 2, for troubleshooting assistance. Table 4A – DTC Code to Service Action Code (Pages 15 – 21)
  • Page 20 15 seconds. Do not attempt to diagnose J1939 DTCs without the engine running. Call the Bendix Tech Team at 1-800-AIR-BRAKE (1-800-247-2725), option 2, for troubleshooting assistance. Table 4A – DTC Code to Service Action Code (Pages 15 – 21)