Specifications - Met One Instruments 010C Manual

Specifications

010C Wind Speed Sensor
Performance Characteristics
Maximum Operating Range:
Starting Speed:
Calibrated Range:
Accuracy:
Temperature Range:
Distance Constant:
Electrical Characteristics
Power Requirements:
Output Signal:
Output Impedance:
Physical Characteristics
Weight:
Finish:
Cable & Mounting
PN 1953
Mounting:
020DWind Directon Sensor
Performance Characteristics
Azimuth:
Threshold:
Linearity:
Accuracy:
Damping Ratio:
Delay Distance:
Temperature Range:
Electrical Characteristics
Power Requirements:
Output Signal:
Output Impedance:
Physical Characteristics
Weight:
Finish:
Cable & Mounting
PN 1957
Mounting:
Wind Sensors W/ Aluminum Cups & Vane
010C Distance Constant:
020D Damping Ratio:
Specifications are subject to change at any
time.
0-135mph (0-60m/s)
0.5 mph (0.22 m/s)
0 -112 mph (0 -50 m/s)
±1% or 0.15 mph (0.07 m/s)
Resolution <0.1 mph or m/s
-50°C to +65°C (-58°F to +149°F)
less than 5 It (1.5m) of flow (meets EPA specifications)
12 VDC at 10 mA, 12 VDC at 350 mA for internal heater
11 volt (pulse frequency equivalent to speed)
100 Ω maximum
1.5 Ibs (.68 kg)
Clear anodized aluminum; Lexan cup assembly
Cable Assembly; specify length in feet or meters
PN 191 Crossarm Assembly
Electrical 0° -357°
Mechanical 0° -360°
0.5 mph (0.22 m/s)
±1/2% of full scale
±3°
Resolution <0.1 °
Standard 0.6 (magnesium tail) (meets EPA specifications)
Less than 3 ft (91 cm)
-50°C to +65°C (-58°F to +149°F
12 VDC at 10 mA, 12 VDC at 350 mA for internal heater
0-5, 0-2.5 (optional 0-1) VDC for 0° -360°
Ω maximum
1.5 Ibs (.68 kg)
Clear anodized aluminum
Cable Assembly; specify length in feet or meters PN 191-1
Crossarm Assembly
15 ft. (4.6 m) aluminum cup assembly (meets EPA specifications)
0.25 (aluminum tail)
010C Wind Speed Sensor
020D Wind Direction Sensor