Technical Specifications; Electrical Wiring - Polar Refrigeration G604 Quick Start Manual

Stainless steel pizza salad prep/saladette counter

Hide thumbs

Table of Contents

Error Messages

The following table details the cause and subsequent response of the appliance to errors.

Error Message

(flashing)

The inner temperature exceeds

HtA

the set maximum temperature

The inner temperature exceeds

LtA

the set minimum temperature

Short circuit or interruption of

PF1

the thermostat probe input line

Short circuit or interruption of

PF2

the evaporator probe input line

Inner temperature greater than

HLA

90°C

Inner temperature lower than

LLA

-45°C

The alarm message will end when the alarm trigger is no longer present, except PF1 and PF2 that require the appliance to be turned Off, then On again.

Technical Specifications

Model

Voltage

G604

230V 50Hz

G605

230V 50Hz

G606

230V 50Hz

G607

230V 50Hz

Electrical Wiring

POLAR appliances are supplied with a 3 pin, moulded, BS1363 plug and lead, with a 13 amp fuse as standard.

The plug is to be connected to a suitable mains socket.

POLAR appliances are wired as follows:

•

Live wire (coloured brown) to terminal marked L

•

Neutral wire (coloured blue) to terminal marked N

•

Earth wire (coloured green/yellow) to terminal marked E

All POLAR appliances must be earthed, using a dedicated earthing circuit.

If in doubt consult a qualified electrician.

Electrical isolation points must be kept clear of any obstructions. In the event of any emergency disconnection being required they must be readily accessible.

Disposal

EU regulations require refrigeration product to be disposed of by specialist companies who remove or recycle all gasses, metal and plastic components.

Consult your local waste collection authority regarding disposal of your appliance. Local authorities are not obliged to dispose of commercial refrigeration

equipment but may be able to offer advice on how to dispose of the equipment locally.

Alternatively call the POLAR helpline for details of national disposal companies within the EU.

Compliance

POLAR parts have undergone strict product testing in order to comply with regulatory standards and specifications set by international, independent, and

federal authorities.

POLAR products have been approved to carry the following symbol:

Cause

Display flashes

Alternating error message and current temperature

Display flashes

Alternating error message and current temperature

Display flashes

Alternating error message and current temperature

Display flashes

Alternating error message and current temperature

Temperature