Wireless Transmitting Indication; Modules Are In The Process Of Being Configured; Cautions - Ebyte E22-230T30D User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd.

5.6.2 Wireless transmitting indication

Buffer Empty: the data in the internal 1000 byte buffer, all written to the wireless chip (automatic packet splitting).

When AUX=1 the user initiates less than 1000 bytes of data continuously without overflow.

Buffer is not empty when AUX=0: the data in the internal 1000-byte buffer has not yet been fully written to the wireless chip and

turned on to transmit, at which time the module may be waiting for the end of user data timeout, or is in the process of wireless
sub-packet transmission.
【Note】 : AUX=1 does not mean that all serial data of the module have been transmitted through the wireless, or the last packet of data
may be in the process of transmitting.

5.6.3 Modules are in the process of being configured

Only when resetting and exiting sleep mode.


5.6.4 Cautions

Serial
numbe
r
Copyright ©2012–2021，Chengdu Ebyte Electronic Technology Co.,Ltd.
AUX Notes
E22-230T30D User Manual
11