Troubleshooting; Specifications - Panasonic nanoe EH-NA27 Operating Instructions Manual

Troubleshooting

Problem
It switches frequently to cold air
while using in "Hot" air, or sparks
can be seen within the body.
(These sparks are caused by the
thermostat switch which is the
protective device, and are not
dangerous.)
The hot air repeatedly turns into
cool air.
The hot air is abnormally hot.
The power plug is abnormally
hot.
Sparks are generated inside the
nanoe™ outlet.
The nanoe™ outlet emits a noise
(crackling noise).
If the problems still cannot be solved, contact the store where you purchased the unit or a service center authorized by
Panasonic for repair.

Specifications

Power source
Power consumption
Accessory
This product is intended for household use only.
Possible cause
Lint has accumulated on the air inlet or air outlet.
Hair or something is blocking the air inlet.
The connection to the household outlet is loose.
Abnormality caused by a dirty electrode
(needle portion).
220 V 50‑60 Hz
1 000 W
Remove accumulated lint.
(See page 11.)
Do not block the air inlet.
Fully insert the plug.
Perform maintenance of the nanoe™
outlet. (See page 10.)
230 V 50‑60 Hz
1 100 W
Quick‑dry nozzle
Action
240 V 50‑60 Hz
1 200 W
13