Advertisement
SIARGO
Safety and Warranty
Wetted Materials and Compatibility
The meter body is made of aluminum alloy and optional with stainless steel.
Sensors comprise of silicon, silicon nitride and silicon dioxide and the sensor
surfaces are passivated with silicon nitride and silicon dioxide. The electronic
sealing is provided by
RTV
(room temperature vulcanizing) silicone sealant
composed of
HOCH
(SiO)
CH
H.
3
n
3
Safety Precautions
The product is designed for use with general purpose gases such as air and
nitrogen. It is advised that the products are best used for non-explosive clean
gases. The meters cannot be used for gas metrology of fluoride or fluoride
containing gases. For updates of the product certification information, please
contact manufacturer or visit www.Siargo.com
extreme corrosive and toxic may cause the product malfunctioning or even severe
damages. The product sealing is ensured to work under working pressure of 60 psi
and is leakage proof before the shipment. But cautions and further leakage test are
important at installation as well since any leakage could cause severe safety issue.
The power supply for this product requires a voltage supply of 8-24 Vdc, all
precautions and measures for electrical voltage handling must apply.
Attention: Any alternation and/or improper use of the product without the
permission of the manufacturer can cause unpredicted damages and even injuries
or other severe situations. Siargo Ltd or any of its employees, subsidiaries shall
not be hold and indemnified against such consequences due to such circumstances
via improper use of the product.
All maintenance of the product should be done by trained and certified personnel
by Siargo Ltd.
For further information, please contact the manufacturer.
User Manual
WR
.
Use for other gases such as
.
SIARGO
Environmental compliance
Siargo commits to be in compliance with the environmental regulations. This
includes all package materials. Please dispose the corresponding materials by it
categories, such as wood, paper, plastics. For the disposal of the entire product,
please follow the electronics disposal regulations and laws.
-704
Customer service and Contact
Siargo shall guarantee its product quality and ensure the quality assurance in its
entire manufacture process. For any questions or technical support, please contact
at the following address and we shall response timely.
Headquar ters
Siargo Ltd.
3100 De La Cruz Boulevard, Suite 210,
Santa Clara, California 95054,USA
Phone: +01(408)969-0368
Email: info@Siargo.com
User Manual
Advertisement
