Page 1
MEMS Mass Flow Meter User Manual SIARGO MEMS Mass Flow Meter Introduction MF4600 Series MF4600 series F4600 series mass flow meters are made with Siargo’s proprietary MEMS sensing technology. It applies for clean and dry gas metering and control. The meter is designed...
User Manual User Manual SIARGO SIARGO Pin definition Description Color Definition Electrical interface Blue RS485B (TX RS232) Down key Green Analog output Up key , Power + (8 24Vdc) LED display Black , ground - (power/signal) Flow direction Yellow RS485A (RX RS232) Function light Function key Manual adjustable valve...
User Manual User Manual SIARGO SIARGO Operation Menu settings Operation Mode The meter shall display instant, accumulated and The Menu Settings will allow the user to execute keyboard lock/unlock, reset accumulated I-LED on II-LED on flowrate, reset offset, set time, response time, instant flow decimal point etc. peak-valley flowerate.
User Manual User Manual SIARGO SIARGO Reset to factory default value SETTING MODE This function allows user to reset all parameters to factory default values. Instant low rate Decimal setting for instant flowrate Push Push and keep for This function allows user to set the decimal point of instant flowrate. more than 2 sec Keyboard Keyboard...
Page 6
User Manual User Manual SIARGO SIARGO Safety and Warranty Environmental compliance Siargo commits to be in compliance with the environmental regulations. This Wetted Materials and Compatibility includes all package materials. Please dispose the corresponding materials by it The meter body is made of aluminum alloy and optional with stainless steel. categories, such as wood, paper, plastics.