Table of Contents
Advertisement
5-1 Maintenance
Keeping
Carrying
Keeping jumper cable
Check battery voltage
Check measurement value
5-2 Calibration & service
Calibration
Service
5
Part from other goods or cover with attention sign not to be shocked or vibrated because
ACE-1000 VW data recorder is a precise apparatus with built-in electronic circuit.
Keep in well-ventilated room without direct light. Long exposure to direct light makes
measuring malfunction due to extreme temperature change.
Take great care not to make big measuring errors based on changing zero point due to
heavy impact or vibration in carrying. Do not put any heavy things on it, settle down and
take actions not to be shocked when carrying in vehicles.
Do not bend the jumper cable. Keep it carefully so that it will not be disconnection. When
using it, do not pull it by pulling it hard or do not pull it with great force. When not using the
jumper cable, put it in a bag or case and store it in a place where it will not be damaged.
Confirm the voltage of the built-in battery before or after using it.
Too low voltage makes no signal of the measuring by the sensor.
Please contact us if you think the measurement value is not correct when measuring the
sensor.
Model ACE-1000 VW data recorder is revised and shipped with exact input / output
specifications of the electric circuit by using each special rectifier.
Therefore it allows for highly stable and reliable values in every VW sensor.
For effectively using a VW data recorder without any trouble, it is strongly recommended to
read the manual and to handle it consistently.
We will check any defects or performances if there are any troubles.
ACE INSTRUMENT A/S team
Tel) +82-31-459-8753 Fax) +82-31-459-8758
acens@naver.com
www.aceinstrument.com
5. Calibration & Service
- 16
Advertisement
Table of Contents
