Configuring Trill Gr; Displaying And Maintaining Trill - H3C S5830V2 Series Configuration Manual

2. Enable SNMP
notification sending
for TRILL.
3. Enter TRILL view.
4. Configure the context
name for the SNMP
object for managing
TRILL.

Configuring TRILL GR

Graceful Restart (GR) ensures the continuity of packet forwarding when a protocol restarts or an
active/standby switchover occurs. The device on which a protocol restarts or an active/standby
switchover occurs advertises the restart status to the neighbors, and allows the neighbors to re-establish
connections. GR involves the following roles:
• GR restarter—Graceful restarting router. It must be GR capable.
GR helper—A neighbor of the GR restarter. It helps the GR restarter to complete the GR process.
•
To configure TRILL GR:
Step
1. Enter system view.
2. Enter TRILL view.
3. Enable GR for TRILL.
4. (Optional.) Configure
the GR interval for TRILL.

Displaying and maintaining TRILL

Execute the display commands in any view and the reset command in user view.
Task
Display TRILL ardency table
information.
Display brief TRILL information.
Display TRILL FIB information.
Display TRILL GR status.
Display TRILL port information.
snmp-agent trap enable trill
[ adjacency-state-change | area-mismatch |
buffsize-mismatch | id-length-mismatch |
lsdboverload-state-change | lsp-parse-error |
lsp-size-exceeded | max-seq-exceeded |
maxarea-mismatch | new-drb | own-lsp-purge
| protocol-support | rejected-adjacency |
skip-sequence-number | topology-change |
version-skew ] *
trill
snmp context-name context-name
Command
system-view
trill
graceful-restart
graceful-restart interval
interval
Command
display trill adjacent-table [ count | nickname nickname interface
interface-type interface-number ]
display trill brief
display trill fib [ count | nickname nickname ]
display trill graceful-restart status
display trill interface [ interface-type interface-number ]
16
By default, SNMP
notification sending is
enabled for TRILL.
N/A
By default, no context name
is set for the SNMP object for
managing TRILL.
Remarks
N/A
N/A
By default, GR is disabled for TRILL.
The default setting is 300 seconds.