Table of Contents
Advertisement
Buttons
Buttons
Below is an overview of the buttons and their setting options.
Buttons
The selection of programme settings depends on the selected programme. You
can see the selection options for each programme in the overview for
→ "Programmes", Page 27.
Button
(Start / Pause)
Speed
ActiveOxygen
/
(ReadyIn)
- 90° (Temperature)
- 1400 (Spin
Speed)
(mains switch)
(Remote)
Selection
¡ Start
¡ Cancel
¡ Pause
¡ Activate
¡ Deactivate
¡ Activate
¡ Deactivate
1–24 hours
– 90 °C
– 1400 rpm
¡ Switch on
¡ Switch off
¡ Activate
¡ Deactivate
¡ Open the
Home Connect
menu
Description
Start, cancel or pause the programme.
Activate or deactivate a short washing pro-
gramme.
Note: Energy consumption increases.
The washing result is not affected by this.
Activate or deactivate active oxygen treatment.
Active oxygen is a special type of oxygen which
effectively reduces odours.
Set the programme end.
The programme duration is already included in
the set number of hours.
Once the programme has started, the pro-
gramme duration is displayed.
Note: Use the buttons to set the setting values.
Adjust the temperature in °C.
Adjust the spin speed or deactivate the spin
cycle.
If
is selected, the water is drained and the
spin cycle is deactivated at the end of the wash-
ing cycle. The laundry stays wet inside the drum.
Switch the appliance on or off.
If you briefly press the button, the appliance will
be enabled for remote start via the Home Con-
nect app
If you press the button for approx. 3 seconds, the
Home Connect menu opens.
Note: For safety reasons, remote start cannot be
activated if the door is open.
Buttons en
25
Advertisement
Table of Contents
