Table of Contents
Advertisement
Display
1
E:60 / -2B
1
Example
Designation
Water consumption
End signal
Button signal
Display brightness
Reminder to clean the
drum
Voltage control system Flashes: The automatic voltage control system detects
Voltage control system Flashes: The programme has been paused because of
Foam detection system The appliance has detected too much foam.
Door
Tap
Error
Description
Water consumption for the selected programme.
: Low water consumption
¡
: High water consumption
¡
Basic setting
Basic setting
Basic setting
Flashes: Drum is dirty. Run the limp. tambor pro-
gramme for cleaning and caring for the drum and the
outer tub.
→ "Cleaning the drum", Page 44
impermissible voltage drops. This will pause the pro-
gramme.
Note: The programme will continue when the voltage
is permissible again.
impermissible voltage drops. The voltage is permiss-
ible again and the programme will continue.
Note: The programme duration is extended.
¡ Lights up: The door is locked and cannot be
opened.
¡ Flashes: The door is not closed properly.
¡ Off: The door is unlocked and can be opened.
¡ No water pressure.
¡ The water pressure is too low.
Error code, error display, signal.
Display en
23
Advertisement
Table of Contents
