Specifications; Directions For Use; Featured Highlights - Guardian H965 Use & Care Instructions Manual

Ultrasonic humidifier
Hide thumbs Also See for H965:
Table of Contents

Advertisement

Available languages

Available languages

SPECIFICATIONS

HUMIDIFYING MODE: Ultrasonic Cool Mist
SUCCESSIVE HUMIDITY HOURS: Up to approximately 70 hours between tank refills.
PARTS
Carry
Humidity Spout
Handle
Tank
Base
Power
Plug
Night Light
Control
Power Button
Mist Control/Refill
Indicator LED

FEATURED HIGHLIGHTS

POWER BUTTON
Turns humidifier on/off.
MIST CONTROL
The spray volume or amount of mist that is produced by the unit can be adjusted to three levels based on need.
WATER REFILL INDICATOR
When the unit is low on water the Power Button Light turns red, and the unit will shut off. Simply add more water
to continue use. Unit will automatically resume running when water tank has been refilled.
NIGHT LIGHT
An LED illuminates the tank for a soft glow night light
E-4
TANK CAPACITY: 1.0 gallons
SILVER CLEAN
TECHNOLOGY
Silver Clean
technology is embedded in the tank to fight
the growth of mildew and mold on the surface of the water tank.
Night Light Cap
Tank Lid
Night Light
Cleaning Brush
Storage
Dry Air
Exhaust
Ultrasonic
Disk

DIRECTIONS FOR USE

SET UP
Select a firm, level, flat location - at least six inches (15 cm) from any wall or object for proper air flow.
Place the humidifier on a water-resistant surface, as water can damage furniture and some flooring.
Do not place unit directly on carpet, towels, blankets or other absorbent surfaces.
Guardian Technologies will not accept responsibility for damage caused by water spillage.
FILLING -
Make sure unit is unplugged.
1. Separate the tank from the base of
the unit.
3. Pour cool, clean water directly into
the tank. Do not pour anything but
water into the tank.
6. Attach the tank to the base of the unit
by aligning night light (in base) with night
light cap (in tank). Plug in.
2. Flip over water tank and open the
tank lid, turning it to the left
4. Close the tank lid, turning it to the right.
It is important to FIRMLY secure cap
after filling the tank with water.
6. Power Button
Before turning on make sure there is
water in the unit. Press the Power button.
E-5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents