COLORATO CLF-18WRC Instruction Manual

COLORATO CLF-18WRC Instruction Manual

Wall fan with remote control

Advertisement

www.colorato.net
INSTRUCTION MANUAL OF
WALL FAN WITH REMOTE CONTROL
MODEL: CLF-18WRC
Read carefully these instructions,
before using the appliance

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CLF-18WRC and is the answer not in the manual?

Questions and answers

Summary of Contents for COLORATO CLF-18WRC

  • Page 1 INSTRUCTION MANUAL OF WALL FAN WITH REMOTE CONTROL MODEL: CLF-18WRC Read carefully these instructions, before using the appliance...
  • Page 2 (mm) (V~) (Hz) (m³/min) (Phase) (r/min) CLF-16W 220-240 Single 1400 CLF-18W 220-240 Single 1400 CLF-18WRC 220-240 Single 1400 STRUCTURAL DRAWING front guard blade screw washer back guard motor washer screw 10. bracket 11. wall board 12. nut 13. washer 14.
  • Page 3 2. OPERATING INSTRUCTIONS 1) Before using, check if the voltage and frequency on the data plate are in agreement with local voltage. 2) Unscrew the holding screw off the control box (as shown in the picture), and then fix the box onto the tube base at position shown in the picture.
  • Page 4 INSTRUCTION MANUAL FOR REMOTE CONTROL BUTTONS AND FUNCTIONS OFF: Turns the fan off. ON/SPEED: Turns the fan on and with repeat pressing adjusts the fan’s speed to LOW, MED, HIGH. TIME: It controls the work time. Each pressing adds 0,5 h and the max working time is 7,5 h. MODE: The fan has 3 different work modes: normal, natural και...

Table of Contents