Luxen Home WHF730 Instruction Manual

Cement/iron bowl stone finish outdoor patio fountain with led light

Advertisement

Product Name:
SKU #:
Thank you for purchasing this Luxen Home product. This product has been manufactured with the highest
standards of safety and quality.
PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
Unpack all parts from Styrofoam and bubble wrap inside the carton to ensure there are no missing or damaged
parts. If any parts are missing or damaged, do not attempt to assemble or use the product.

CARTON CONTENTS:

Description
Fountain
Fountain Top Lid
Stand
Pump
Compatible Pumps for this fountain:
Pump Model No.
JR250/LED
JB333/LED
YH300-70/LED
YH-LV70T
Tools required for assembly: No tools required for assembly.

Assembly Instructions:

1. Unpack the contents of the box and check to make sure that all items are accounted for and in good
condition.
2. Select a flat, level surface for the assembly and final location of your fountain.
3. Place the fountain base on to the stand. Through the opening in the fountain base, draw the electrical pump
cord through the hole to the base of the fountain.
4. Insert the water tube from the bottom of fountain lid into the pump. Insert the LED connector into the
pump connector, and twist to tighten. Place the pump inside the fountain, and place lid on top of the
fountain base.
5. Add clean water into the fountain. The water level should be approximately 30mm lower than the edge of
the basin.
6. Connect the power cable to outlet. If installed properly, water flow in the fountain will begin shortly.
7. Please do not use the electrical plug in wet weather conditions. Please note: On first use, there may be air in
the pump. It may take several minutes until all the air escapes.
8. To eliminate the possibility of water damage around your fountain, check for leaks and excessive splashing
after the initial setup of your fountain. It is highly recommended that this fountain be placed in an area
Cement/Iron Bowl Stone Finish Outdoor Patio Fountain with LED Light
WHF730
Quantity
1
1
1
1
Contact: sales@winsomehouse.com
Please save this manual for future reference.
Instruction Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WHF730 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Luxen Home WHF730

  • Page 1 Cement/Iron Bowl Stone Finish Outdoor Patio Fountain with LED Light SKU #: WHF730 Thank you for purchasing this Luxen Home product. This product has been manufactured with the highest standards of safety and quality. PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
  • Page 2 Product Name: Cement/Iron Bowl Stone Finish Outdoor Patio Fountain with LED Light SKU #: WHF730 where it cannot be damaged. 9. Do not leave your fountain running for extended periods of time when no one is present to observe the performance.
  • Page 3 Instruction Manual Please save this manual for future reference. Product Name: Cement/Iron Bowl Stone Finish Outdoor Patio Fountain with LED Light SKU #: WHF730 Pump Instructions: Special Warnings and Cautions: CAUTION: • The pump has been evaluated for use with water only.
  • Page 4 Product Name: Cement/Iron Bowl Stone Finish Outdoor Patio Fountain with LED Light SKU #: WHF730 WARNINGS: 1. To reduce the risk of electric shock, connect only to a properly grounded, grounding type receptacle. 2. To reduce the risk of electric shock, use only on portable self-contained fountains no larger than 5 feet in any dimension.
  • Page 5 Product Name: Cement/Iron Bowl Stone Finish Outdoor Patio Fountain with LED Light SKU #: WHF730 CARE & MAINTENANCE: 1. Keep the water clean – clean water will prolong the useful life of your pump. 2. Use a pre-filter on your pump if available.

Table of Contents