Luxen Home WHF732 Instruction Manual

Product Name:
SKU #: WHF732
Thank you for purchasing this Luxen Home product. This product has been manufactured with the highest
standards of safety and quality.
PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
Unpack all parts from Styrofoam and bubble wrap inside the carton to ensure there are no missing or damaged
parts. If any parts are missing or damaged, do not attempt to assemble or use the product.

CARTON CONTENTS:

Description
Fountain
Pump
Faucet Spout w/ tube
Handle
Bolt
Nut
Bird
Compatible Pumps for this fountain:
Pump Model No.
JR250
JB333
YH300-70
Tools required for assembly: No tools required for assembly.

Assembly Instructions:

1. Unpack the contents of the box and check to make sure that all items are accounted for and in good
condition.
2. Select a flat, level surface for the assembly and final location of your fountain.
3. Attach the handle to the water spout using the bolt provided. Insert the bolt through the holes at the top of
the spout, secure with the nut.
4. Guide the water tube at the base of the spout through the opening in the top of the fountain. Place the
fountain water spout on top of the fountain.
5. From the opening at the back of the fountain base, insert the water supply tube into the pump outlet. Insert
the LED connector into the pump connector, and twist to tighten. Place the pump upright in the basin and
draw the pump power cord out of the fountain back.
6. Add clean water to the fountain. The water level should be approximately 30mm lower than the edge of the
basin.
Resin Whiskey Barrels and Water Pump Outdoor Patio Fountain
Quantity
1
1
1
1
1
1
1
Contact: sales@winsomehouse.com
Please save this manual for future reference.
Instruction Manual