Before First Use; Operation; Assembling Accessories; Turning The Product On/Off - Silvercrest SSMS 600 E3 Operation And Safety Notes

No action is needed from users
to shift the product between 50
and 60 Hz . The product adapts
itself for both 50 and 60 Hz .
Cleaning and storage
The drive unit
holder shall not be exposed
[ 13 ]
to any dripping or splashing
water .
Refer to the "Cleaning and
care" section for instructions on
how to clean the product .
˜ Before first use
Remove all the packaging materials .
Clean the product (see "Cleaning and care") .
˜ Operation
˜ Assembling accessories
(ill . B)
Put the desired accessory (
the drive unit .
15 ] [
on the accessory has to align with
the drive unit .
Turn the accessory until
Dismount all the accessories in reverse order .
and the whisk
15 ] [
or ) on
6 ] [ 13 ] [ 14 ] [
on
aligns with .
˜ Turning the product on/off
m
WARNING: The product has an initial
rotary impulse . Hold the product firmly during

operation .

The speed regulator
steplessly to regulate the speed . Turn the
beam of the speed regulator to the desired
adjustment:
Speed regulator
Speed scale
(Highest)
Connect the power plug
mains socket .
Press and Setting
hold button
Speed according to speed
[ 4 ]
regulator
TURBO
Highest speed
[ 5 ]
Turning off the product: Release the pressed
button ( or ) .
4 ] [ [ 5 ]
NOTES:
Let the product rest at least 2 minutes
between cycles (see Max. time in the
following table) .
After 5 continuous operation cycles: Let the
product cool to the room temperature before
reusing it .
The speed can also be changed while the
product is operating .
can be turned
2 ] [
2 ] [
3 ] [
(Lowest)
to a suitable
1 ] [
setting
2 ] [
GB/IE/NI/CY 11