Silver Lynx DRAWER BASE BED Assembly Instructions

As one of Australia's leading bedroom furniture manufacturers, we have long established partnerships with
Australia's most successful retailers.
Customers who buy our products recognise our commitment to quality and customer satisfaction.
Silverlynx is a value's based business. Our commitment to quality, evolving design leadership, customer
service and exceeding customer expectations - is unsurpassed in the industry.
Enjoy your Silverlynx product.
Please read through these assembly instructions carefully to ensure that you can assemble your new purchase
without stress. These detailed instructions will guide you on how to prepare and assemble your bedroom
DIFFICULTY
WE ADVISE YOU DO NOT USE POWERED DRILLS TO ASSEMBLE ANY BOLTS ON THIS BED

EQUIPMENT PROVIDED

Hardware Pack - attached to Siderails:
phillips head screws; 2x 38mm screws; 2x 30mm bolts; 2x washers; 1x allen key
Note: These instructions will also guide you on how to use the additional hardware pre-fitted to your bed components
Bed Frame Parts:
Slat System: See the attached document "Amendment to instructions for all SilverLynx beds"
Not Provided: Phillips head screwdriver
Bomi Furniture P/L trading as Silver Lynx ABN 99 006 489 541 11-17 Sages Road Glenroy Victoria 3046 Australia
T:+61 3 9359 4000 F:+61 3 9359 4322 E:sales@silverlynx.com.au W:www.silverlynx.com.au
Thank you for purchasing a Silverlynx product
DRAWER BASE BED
Assembly Instructions
Please retain these instructions for future reference
containing - 12x (M6) 10mm button head bolts; 2x 15mm
*Please note, your bed head may
look different, however the following
instructions will still apply
suite.