1. Manuals
  2. Brands
  3. Minnich Manuals
  4. Drill
  5. A-1C
  6. Operators & service manual

Minnich A-1C Operators & Service Manual

Dowel drill
Hide thumbs Also See for A-1C:
Table of Contents

Advertisement

Quick Links

Download this manual
A-1C/A-2C Dowel Drill
Operator/Service Manual
Hours of Operation
8:00AM to 4:30PM Mon. – Fri. Eastern Standard Time
277 North Main Street
Phone: 419.524.1000
PO Box 367
www.minnich-mfg.com
Toll Free: 800.524.1033
Mansfield, OH 44902
e-mail: sales@minnich-mfg.com
Fax: 419.524.4000
Form: LIT-026 Revised 8/1/2007

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the A-1C and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Minnich A-1C

Summary of Contents for Minnich A-1C

  • Page 1 A-1C/A-2C Dowel Drill Operator/Service Manual Hours of Operation 8:00AM to 4:30PM Mon. – Fri. Eastern Standard Time 277 North Main Street Phone: 419.524.1000 PO Box 367 www.minnich-mfg.com Toll Free: 800.524.1033 Mansfield, OH 44902 e-mail: sales@minnich-mfg.com Fax: 419.524.4000 Form: LIT-026 Revised 8/1/2007...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS Section Page # WARRANTY ------------------------------------------------------------------------------------------------------------ 4 GENERAL SPECIFICATIONS ------------------------------------------------------------------------------------- 5 GENERAL SAFETY RULES---------------------------------------------------------------------------------------- 7 WORK AREA -------------------------------------------------------------------------------------------------- 8 PERSONAL SAFETY ---------------------------------------------------------------------------------------- 8 TOOL USE AND CARE ------------------------------------------------------------------------------------- 8 SERVICE-------------------------------------------------------------------------------------------------------- 9 SAFETY DECAL PLACEMENT ----------------------------------------------------------------------------------10 DRILL STEEL AND BITS-------------------------------------------------------------------------------------------14 WARRANTY---------------------------------------------------------------------------------------------------14 GENERAL NOTES ------------------------------------------------------------------------------------------14 DRILL STEEL AND BITS IN STOCK -------------------------------------------------------------------15...
  • Page 3 TABLE OF CONTENTS CONTINUED Section Page # PART BREAKDOWNS WHEEL ASSEMBLIES A-1C & A-2C ------------------------------------------------------------------- 22 BRAKE ASSEMBLY ---------------------------------------------------------------------------------------- 24 STEERING ASSEMBLY ----------------------------------------------------------------------------------- 26 RAIL ASSEMBLLY A-2C----------------------------------------------------------------------------------- 28 RAIL ASSEMBLY A-1C-48 -------------------------------------------------------------------------------- 30 RAIL ASSEMBLY A-1C-36 -------------------------------------------------------------------------------- 32 RAIL ASSEMBLY A-1C-30 -------------------------------------------------------------------------------- 34...

  • Page 4: Warranty

    WARRANTY AND SERVICE AGREEMENT Minnich Manufacturing Co. warrants to the original purchaser that, if any part of the product proves defective in material or workmanship within one year from purchase, and is returned to Minnich Manufacturing Co. within 90 days after the defect is discovered, Minnich Manufacturing Co.

  • Page 5: General Specifications

    A-1C Single Drill, On Slab Unit Three position drilling with 48” unit: Horizontal, Vertical and 35 degree stitch Urethane filled tires 3-1 skew drilling standard Adjustable drill height and depth Dust collection is available Model A-1C-48 A-1C-36 A-1C-30 A-1C-24 .875” x 4.25”...
  • Page 6 A-2C Multiple Drill, On Slab Unit with Steering Three position drilling: Horizontal, Vertical and 35 degree stitch Urethane filled tires Larger oiler for easy maintenance Adjustable drill height, depth and centers Dust collection is available Model A-2C .875” x 4.25” Drill Steel Shank (22.2mm x 107.9mm) Drill Steel Length U.C.

  • Page 7: General Safety Rules

    GENERAL SAFETY RULES This manual contains NOTES, CAUTIONS, and WARNINGS. These MUST be followed to prevent the possibility of improper use, incorrect servicing, damaging the equipment, or personal injury. Read and comply with all NOTES, CAUTIONS and WARNINGS included in these instructions.

  • Page 8: Work Area

    - WORK AREA – Keep your work area clean and well lit. Cluttered and dark areas invite accidents. Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. - PERSONAL SAFETY - Stay alert, watch what you are doing and use common sense when operating a power tool.

  • Page 9: Service

    SERVICE – DO NOT run the drill unit while you make adjustments and repairs unless the procedure is approved. Escaping fluid and air under pressure can have sufficient force to penetrate the skin causing serious personal injury. If injured by escaping fluid or air, see a doctor at once. Serious infection or reaction can develop if proper medical treatment is not administered immediately.

  • Page 10: Safety Decal Placement

    A-1C Safety Decal Kit Placement (011394-00000) 012287-00006 012287-00001 012287-00008 012287-00007 012287-00012 012287-00003 - 10 -...
  • Page 11 012287-00010 012287-00005 012287-00007 - 11 -...
  • Page 12 A-2C Safety Decal Kit Placement (011394-00000) 012287-00006 012287-00007 012287-00012 012287-00003 012287-00008 - 12 -...
  • Page 13 012287-00008 012287-00005 012287-00010 012287-00007 - 13 -...

  • Page 14: Drill Steel And Bits

    Minnich Manufacturing’s drill steel and bit warranty is limited to the warranty provided by the supplier. All warranty claims must be submitted to Minnich for evaluation and sent to the supplier for authorization.

  • Page 15: Drill Steel And Bits In Stock

    Drill Steel & Bits In Stock 1 Piece Steel & Bit (Whirly Bit) Part Number Hole Diameter Shank Size UC Length 005367-12.00 5/8" (15.9mm) 7/8" x 4 1/4" (22.2mm x 107.9mm) 12" (30.5cm) 005367-24.00 5/8" (15.9mm) 7/8" x 4 1/4" (22.2mm x 107.9mm) 24"...

  • Page 16: Usage Calculation

    Usage Calculation The calculations below are nominal and could vary depending on the hardness of the concrete, aggregates used and the possibility of bits hitting steel reinforcement. Whirly Bit, Taper Bit and “H” Thread Bit (B)Bit=180 holes x 9” B=1620” Number of bits needed = (number of holes x hole depth)/1620”...

  • Page 17: Set-Up Procedure

    A-1C A-2C Set-Up Procedure Lubricator – Make sure that the lubricator is full. See recommended lubricants below. Air Supply – Use a 3/4” hose to supply air to the drill unit. Install the drill steel and bit into the drill.

  • Page 18: Operation Procedure

    A-1C A-2C Operation Procedure 1. Lubricator – Make sure that the lubricator is full. See recommended lubricants. 2. Air Supply – Use a 3/4” hose to supply air to the drill unit. 3. Install the drill steel and bit into the drill.

  • Page 19: Maintenance Lubrication Chart

    - 19 -...

  • Page 20: Trouble Shooting

    TROUBLE SHOOTING AIR DRILL IF SYMPTOMS OF POOR PERFORMANCE DEVELOP, THE FOLLOWING CHART CAN BE USED AS A GUIDE TO DETERMINE THE PROBLEM. WHEN DIAGNOSING FAULTS IN OPERATION OF THE AIR DRILL, ALWAYS CHECK THAT THE COMPRESSOR IS SUPPLYING THE CORRECT SCFM AND AIR PRESSURE AS LISTED IN THE TABLE PROBLEM CAUSE REMEDY...
  • Page 21 TROUBLE SHOOTING AIR DRILL PROBLEM CAUSE REMEDY DRILL RUNS SLOW OR DOES NOT DRILL EFFECTIVELY NOT ENOUGH AIR REACHING ON MULTI DRILL UNITS, TURN OFF ONE OR TWO DRILL. IT SHOULD HAVE DRILLS. IF THE REMAINING DRILLS PICK UP SPEED, 100SCFM PER DRILL AND 110 PSI CHECK THE AIR COMPRESSOR.

  • Page 22: Wheel Assemblies A-1C & A-2C

    - 22 -...
  • Page 23 NUT 7/16-20 008253-00000 TIE ROD 008280-00001 ROD EYE LH 006087-000LH NUT 7/16-20 LH 007094-00000 ASSEMBLY, TIRE & RIM A-1C URETHANE FILLED 0A7931-00000 ASSEMBLY, TIRE & RIM A-2C URETHANE FILLED 004675-00001 WASHER 006180-1.500 PIN, COTTER 5/16 X 1-1/2 007430-00000 BUSHING, BRONZE...

  • Page 24: Brake Assembly

    - 24 -...
  • Page 25 FIG. PART NUMBER DESCRIPTION 006483-00008 FITTING, LUB 1/4-28 TAPER STRAIGHT 012004-00000 BRAKE BAR 0A8366-00000 WELDM’T, BRAKE ARM 007246-00000 BRAKE HANDLE 003016-00044 GRIP, HANDLE 006036-2.500 HHCS, 1/4-20 X 2-1/2 GR.5 006534-1.750 PIN, SPRING 3/16 X 1-3/4 007235-00000 MOUNTING, SHAFT 006038-4.000 HHCS, 3/8-16 X 4 GR. 5 006108-00000 FLAT WASHER 3/8 USS 0A7245-00000...

  • Page 26: Steering Assembly

    - 26 -...
  • Page 27 FIG. PART NUMBER DESCRIPTION A11749-00000 WELDM’T, SPROCKET 008336-00001 BEARING, PILLOW BLOCK 008262-00000 BUSHING, BRONZE 000798-00000 GREASE, FITTING 1/8 006039-1.750 HHCS, 7/16-14 X 1-3/4 GR.5 006108-00000 FLAT WASHER 3/8 006087-00000 LOCK NUT 7/16-14 008280-00000 ROD END 008280-00001 ROD END LH 006215-1.750 SHCS, 5/16-18 X 1-3/4 006403-00000 LOCK NUT 5/16-18...

  • Page 28: Rail Assemblly A-2C

    - 28 -...
  • Page 29 A-2C RAIL ASSEMBLY FIG. PART NUMBER DESCRIPTION 007282-00000 CHAIN, SINGLE JACK #12 (10 LINKS) 008479-00000 PIN, TAB LOCK 006043-2.000 HHCS, 3/4-10 X 2 GR.5 006155-00000 LOCK WASHER 3/4 006043-8.000 HHCS, 3/4-10 X 8 GR.5 006049-00000 LOCK NUT 3/4-10 006117-00000 FLAT WASHER 3/4 SAE A11732-00000 WELDM’T, RAIL END 011739-00000...
  • Page 30 - 30 -...

  • Page 31: Rail Assembly A-1C-48

    RAIL ASSEMBLY A-1C-48 FIG. PART NUMBER DESCRIPTION 007282-00000 CHAIN, SINGLE JACK #12 (7-1/2 LONG – 10 LINKS) 008479-00000 PIN, TAB LOCK 006043-2.000 HHCS, 3/4-10 X 2 GR.5 006155-00000 LOCKWASHER, 3/4 006042-8.000 HHCS, 5/8-11 X 8 GR.5 006048-00000 LOCKNUT, 5/8-11 004242-00003...
  • Page 32 - 32 -...

  • Page 33: Rail Assembly A-1C-36

    RAIL ASSEMBLY A-1C-36 FIG. PART NUMBER DESCRIPTION 007282-00000 CHAIN, SINGLE JACK #12 (7-1/2 LONG – 10 LINKS) 008479-00000 PIN, TAB LOCK 006043-2.000 HHCS, 3/4-10 X 2 GR.5 006155-00000 LOCKWASHER, 3/4 006042-8.000 HHCS, 5/8-11 X 8 GR.5 006408-00000 LOCKNUT, 5/8-11 004242-00003...
  • Page 34 - 34 -...

  • Page 35: Rail Assembly A-1C-30

    RAIL ASSEMBLY A-1C-30 FIG. PART NUMBER DESCRIPTION 007282-00000 CHAIN, SINGLE JACK #12 (7-1/2 LONG – 10 LINKS) 008479-00000 PIN, TAB LOCK 006043-2.000 HHCS, 3/4-10 X 2 GR.5 006155-00000 LOCKWASHER, 3/4 006042-6.500 HHCS, 5/8-11 X 6-1/2 GR.5 006408-00000 LOCKNUT, 5/8-11 A11732-00006 WELDM’T, RAIL END...
  • Page 36 - 36 -...

  • Page 37: Rail Assembly A-1C-24

    RAIL ASSEMBLY A-1C-24 FIG. PART NUMBER DESCRIPTION 007282-00000 CHAIN, SINGLE JACK #12 (7-1/2 LONG – 10 LINKS) 008479-00000 PIN, TAB LOCK 006043-2.000 HHCS, 3/4-10 X 2 GR.5 006155-00000 LOCKWASHER, 3/4 006040-1.250 HHCS, 1/2-13 X 1-1/4 GR.5 006406-00000 LOCKNUT, 1/2-13 A11732-00005 WELDM’T, RAIL END...

  • Page 38: Drill Support Assembly (0A9776-00019)

    - 38 -...

  • Page 39: Cylinder End Adjuster (0A8353-00000)

    - 39 -...

  • Page 40: Lift Group A-1C-48

    - 40 -...
  • Page 41 LIFT ASSEMBLY A-1C-48 FIG. PART NUMBER DESCRIPTION 005775-00000 PIN, PIVOT 006174-1.000 PIN, COTTER 1/8 X 1 0A8353-00000 CYLINDER ROD END ADJUSTER 005664-00000 CYLINDER, AIR 4 X 18 0A7960-00001 WELDM’T, HEIGHT ADJUSTMENT 007132-00000 COIL NUT 006535-1.250 PIN, SPRING 1/4 X 1-1/4 006038-1.250...

  • Page 42: Lift Group A-1C-36, 30

    - 42 -...
  • Page 43 PIN, COTTER 1/8 X 1 012234-00000 CYLINDER ADJUSTER 007619-00001 CYLINDER END (A-1C-24) 007619-00002 CYLINDER END (A-1C-36 & 30) 011740-11.50 CYLINDER, AIR 2-1/2 X 11-1/2 (A-1C-36 & 30) 011740-00008 CYLINDER, AIR 2-1/2 X 8 (A-1C-24) 0A7960-00001 WELDM’T, HEIGHT ADJUSTMENT 007132-00000 COIL NUT 006535-1.250 PIN, SPRING 1/4 X 1-1/4 006038-1.250...

  • Page 44: Rail Installation A-2C

    FIG. PART NUMBER DESCRIPTION 005541-00000 BUSHING 0A9101-00002 WELDM’T, PIVOT BRACKET SUB 006406-00000 LOCKNUT, 1/2-13 006040-3.750 HHCS, 1/2-13 X 3-3/4 GR.5 009667-00004 MOUNTING PLATE 0A8505-00003 WELDM’T, BEAM HANGER 002478-00000 TUBE, RECTANGULAR 2 X 3 X .1875 A11744-00000 ASSEMBLY, RAIL 20” X 48” FOR 7/8 X 4-1/4 DRILL 004488-00000 U-BOLT 006345-00000...

  • Page 45: Caster Assembly A-2C

    FIG. PART NUMBER DESCRIPTION 004488-00000 U-BOLT 006345-00000 LOCKNUT 3/8-24 011864-00000 CASTER WHEEL, RIGID A11736-00001 WELDM’T, CASTER MOUNTING 006037-1.000 HHCS, 5/16-18 X 1 GR.5 006106-00000 FLATWASHER 5/16 006403-00000 LOCKNUT 5/16-18 - 45 -...

  • Page 46: Lift Group A-2C

    - 46 -...
  • Page 47 LIFT ASSEMBLY A-2C FIG. PART NUMBER DESCRIPTION 005775-00000 PIN, PIVOT 006174-1.000 PIN, COTTER 1/8 X 1 5664-00002 PIVOT PIN 006174-1.500 PIN, COTTER 1/8 X 1-1/2 0A8238-00002 WELDM’T, LIFT & CYLINDER ANCHOR 007413-00000 0A5542-00004 WELDM’T, HANGER PIN 006040-1.000 HHCS, 1/2-13 X 1 GR.5 006112-00000 FLAT WASHER 1/2 USS 006151-00000...

  • Page 48: Air Schematic A-1C

    AIR SCHEMATIC A-1C - 48 -...

  • Page 49: Air Schematic A-2C

    - 49 -...

  • Page 50: Piping Diagram A-1C

    - 50 -...
  • Page 51 NIPPLE, PIPE 3/4 CLOSE SCH 80 001864-00000 LUBRICATOR 010829-00005 FITTING, MALE ELBOW 5/32 TUBE TO 1/8 MALE NPT (A-1C-36, 30 & 24) 010829-00010 FITTING, MALE ELBOW 1/4 TUBE TO 1/4 MALE NPT (A-1C-48) 010829-00010 FITTING, MALE ELBOW 1/4 TUBE TO 1/4 MALE NPT (A-1C-36, 30 & 24)

  • Page 52: Piping Diagram A-2C

    - 52 -...
  • Page 53 PLUMBING ASSEMBLY A-2C FIG. PART NUMBER DESCRIPTION 008986-00000 FEMALE SPUD 1-1/4 011724-00000 PIPE NIPPLE (WELDED IN FRAME) 006471-00002 PLUG, PIPE HEX SOC 1/4 006000-00015 NIPPLE, PIPE 1 CLOSE SCH 80 0A7350-00006 WELDM’T, LUBRICATOR 011725-00000 TEE, MODIFIED 010829-00010 FITTING, MALE ELBOW 1/4 TUBE TO 1/4 MALE NPT 006296-00010 BUSHING, REDUCER PIPE 16-12 006019-00024...

  • Page 54: Control Panel Assembly A-1C

    FIG. PART NUMBER DESCRIPTION 011214-00000 CONTROL PANEL 010793-00001 CAGE NUT 5/16-18 006106-00000 FLAT WASHER 5/16 006148-00000 LOCK WASHER 5/16 006037-1.250 HHCS 5/16-18 X 1-1/4 GR. 5 010917-00000 VALVE 011199-00000 SWITCH GUARD 011198-00000 TOGGLE SWITCH COVER 006262-00001 SCREW, DRIVE HD RD #4 X 1/4 008972-00000 STEEL FINISHING PLUG 010935-00000...

  • Page 55: Control Panel Assembly A-2C

    FIG. PART NUMBER DESCRIPTION 011214-00000 CONTROL PANEL 010793-00001 CAGE NUT 5/16-18 006106-00000 FLAT WASHER 5/16 006148-00000 LOCK WASHER 5/16 006037-1.250 HHCS 5/16-18 X 1-1/4 GR. 5 010917-00000 VALVE 011199-00000 SWITCH GUARD 011198-00000 TOGGLE SWITCH COVER 006262-00001 SCREW, DRIVE HD RD #4 X 1/4 010935-00000 FEED VALVE 010936-00000...

  • Page 56: Lubricator Installation A-1C

    - 56 -...

  • Page 57: Drill Valve (010925-00000)

    - 57 -...

  • Page 58: Valves (010935-00000 & 010936-00000)

    - 58 -...

  • Page 59: 2-1/2" Bore Feed Cylinder (011740-Xxxxx)

    - 59 -...

  • Page 60: 4" Bore Feed Cylinder (005664-00000)

    - 60 -...

  • Page 61: Pressure Regulator (002880-00000)

    PRESSURE REGULATOR MINNICH P/N 002880-00000 OPERATION A regulator is used in a compressed air system to maintain nearly constant outlet pressure despite changes in the inlet air pressure and changes in downstream flow requirements. Outlet pressure is controlled by the adjusting screw (1). clockwise rotation increases and counter- clockwise rotation decreases outlet pressure setting.

  • Page 62: Pressure Regulator (009626-00010)

    PRESSURE REGULATOR Minnich P/N 009626-00010 SPECIFICATIONS Fluid: Compressed air Maximum inlet pressure: 300 psig (20.7 bar) Temperature range: 0 to 175 F (-18p to 79 Air supply must be dry enough to avoid ice formation at temperatures below 35 F (2 Gauge ports: 1/4”...

  • Page 63: Lubricator (001864-00000) A-1C

    LUBRICATOR MINNICH P/N 001864-00000 CAPACITY: .5 PINT PIPE SIZE: 3/4” N.P.T. Item Number Minnich Part Number Description 001864-00001 Feeder Assembly Kit 001864-00002 Manual Relieving Safety Cap 001864-00003 Sight Window 001864-00004 Check Valve (Constant Feed) 006412-00916 Filler Cap O-Ring 006412-00905 Feeder O-Ring LUBRICATOR IS SET AT 5.5 FROM FACTORY.

  • Page 64: Lubricator (007330-00000) A-2C

    Lubricator (007330-00000) Warning: DO NOT place plastic bowl unit in service without metal bowl guard installed. Plastic bowl units are sold only with metal bowl guards. To minimize the danger of flying fragments in the event of plastic bowl failure, the metal bowl guards should not be removed. If the unit is in service without the metal bowl guard installed, manufacturer’s warranties are void, and the manufacturer assumes no responsibility for any resulting loss.
  • Page 65 - 65 -...

  • Page 66: 40# Rock Drill A-1Cl-48 & 36 (012230-00000)

    40# Rock Drill (A-1C-48 & 36) A12230-00000 When ordering replacement parts you need to furnish the model and serial number of the drill tool. Specifications Net Weight 38lbs. (17.2kg) 2400 Blows Per Minute 7/8” x 4 1/4” (22.2mm x 107.9mm) Chuck Size 3/4”...
  • Page 67 FIG. PART # DESCRIPTION Wear 012230-00001 BACK HEAD CP 012230-00002 THROTTLE VALVE 012230-00003 THROTTLE VALVE HANDLE 012230-00004 THROTTLE VALVE PLUNGER 012230-00005 THROTTLE VALVE SPRING 012230-00006 THROTTLE VALVE BOLT 012230-00007 THROTTLE VALVE HEX NOT (M10) 012230-00008 THROTTLE VALVE SPRING WASHER 012230-00009 AIR CONNECTION TUBE (PT) 012230-0009N AIR CONNECTION TUBE (NPT)

  • Page 68: 30# Rock Drill A-1Cl-30 (A11104-00100)

    30# Rock Drill A11104-00100 (A-1C-30) When ordering replacement parts you need to furnish the model and serial number of the drill tool. Specifications 29lbs. (13.2kg) Net Weight Blows Per Minute 2700 Chuck Size 7/8” x 3 1/4” (22.2mm x 82.6mm) 3/4”...
  • Page 69 FIG. PART # DESCRIPTION 011104-00001 BACKHEAD ASSEMBLY 011104-00002 BACKHEAD 011104-00003 THROTTLE VALVE 011104-00004 THROTTLE VALVE HANDLE 011104-00005 THROTTLE VALVE PLUNGER 011104-00006 THROTTLE VALVE SPRING 011104-00007 THROTTLE VALVE BOLT 011104-00008 THROTTLE VALVE NUT 011104-00009 THROTTLE VALVE WASHER 011104-00015 BLOW TUBE ASSEMBLY 011104-00016 BLOW TUBE GLAND 011104-00017...

  • Page 70: 15# Rock Drill A-1Cl-24 (009052-00000)

    15# Rock Drill 0A9052-00000 (A-1C-24) When ordering replacement parts you need to furnish the model and serial number of the drill tool. Specifications 14.5lbs. (6.58kg) Net Weight 7/8” x 3 1/4” (22.2mm x 82.6mm) Chuck Size Air Inlet (NPT) 1/2” (12.7mm) Air Consumption 36cfm (1.02m3/min)
  • Page 71 FIG. PART # DESCRIPTION 009052-0000 WASHER 009052-0000 PLUNGER 009052-0000 009052-0000 009052-0000 RETAINER 009052-0000 VALVE 009052-0000 VALVE 009052-0000 PISTON 009052-0000 CYLINDER ASSEMBLY 009052-000 BEARING 009052-000 DRIVER 009052-000 CHUCK 009052-000 PAWL 009052-000 PLUNGER 009052-000 SPRING 009052-000 BEARING 009052-000 PLUNGER 009052-000 LEVER 009052-000 SPRING 009052-000 SLEEVE...

  • Page 72: 50# Rock Drill A-2C (009350-00000)

    50# Rock Drill (A-2C) 0A9350-00000 When ordering replacement parts you need to furnish the model and serial number of the drill tool. Specifications Net Weight 51lbs. (23kg) 2300 Blows Per Minute 7/8” x 4 1/4” (22.2mm x 107.9mm) Chuck Size 3/4”...
  • Page 73 FIG. PART # DESCRIPTION 009350-00001 BACKHEAD ASSEMBLY 009350-00013 AIR CONNECTION WASHER 009350-00016 BLOW TUBE GLAND 009350-00017 TUBE GLAND GASKET 009350-00018 BLOW TUBE GASKET 009350-00020 BLOW TUBE 009350-00022 PLUG ADAPTOR 009350-00037 CYLINDER 009350-00038 EXHAUST DEFLECTOR 009350-00039 BLOWING CONECTION 009350-00043 FRONT WASHER BUSHING 009350-00044 FRONT WASHER 009350-00046...

This manual is also suitable for:

A-2c

Table of Contents