Page 1
• Belt clip • Belt clip base • Torx screws (2) To install the belt clip 1 Attach the belt clip base to the back of the PB42 with the two Torx screws. Belt clip base Screw (2 places) 2 Attach the belt clip to your belt.
Page 2
3 Rotate the printer 90° to align the opening in the belt clip base with the tab on the belt clip. 4 Insert the printer into the belt clip and let it rotate back to its natural vertical position. 6001 36th Avenue West Everett, Washington 98203 U.S.A.