F&F DR-09-IP65 Manual

DR-09-IP65
Hermetic motion sensor (PIR),
with presence sensor function
Do not dispose of this device in the trash along with other waste!
According to the Law on Waste, electro coming from households free of charge and can
give any amount to up to that end point of collec� on, as well as to store the occasion of
the purchase of new equipment (in accordance with the principle of old-for-new, regard-
less of brand). Electro thrown in the trash or abandoned in nature, pose a threat to the
environment and human health.
Purpose
The motion sensor is used for automatic and temporary swit-
ching on of lighting if a person or other object appears in places
such as hallways, courtyards, driveways, garages, etc.
It is suitable for use in narrow corridors.
Functioning
The sensor detects the infrared radiation sources. It analyzes
the parameters such as the size of the object, the amount of
heat emitted and the speed of movement between sectors of
detection. The sensor detects movement within its own axis and
radius. Movement in the detection area will automatically swi-
tch on the lighting. From this moment the light will stay on, as
long as the sensor detects continuous movement. Only if there is
no movement in the detection area triggers the lighting support
time. Another movement in the detection area and its subsequ-
ent disappearance in the course of time measurement starts the
support time from the beginning.
F&F Filipowski sp. j.
Konstantynowska 79/81, 95-200 Pabianice, POLAND
phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71
www.fif.com.pl; e-mail: biuro@fif.com.pl
- 1 -